NDE handbook: non-destructive examination methods for condition monitoring
نویسندگان
چکیده
منابع مشابه
POD/POS curves for non-destructive examination
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means (electronic, mechanical, photocopying, recording or otherwise) without the prior written permission of the copyright owner. Neither the Executive, nor the contractors concerned assume any liability for the reports nor do they necessarily reflect the views ...
متن کاملSensor Placement for AerospaceNon - Destructive Evaluation ( NDE ) : Optimization Under Fuzzy
| The ideal design of an airplane should include built-in sensors that are pre-blended in the perfect aerodynamic shape. Each built-in sensor is expensive to blend in and requires continuous maintenance and data processing, so we would like to use as few sensors as possible. The ideal formulation of the corresponding optimization problem is, e.g., to minimize the average detection error for fau...
متن کاملNon-Intrusive Monitoring for Condition-Based Maintenance
The Navy’s Integrated Condition Assessment System (ICAS) is continuously evolving to meet the needs of today’s fleet as well as the requirements of future ship designs. This paper describes a technology known as the non-intrusive load monitor that could support the evolution of ICAS and other condition-based maintenance (CBM) systems. The non-intrusive load monitor (NILM) [8, 9, 10] can be used...
متن کاملNon-destructive Approach for Shotcrete Lining Strength Monitoring
INTRODUCTION Shotcrete lining forms an integral part of conventional tunneling and is widely applied for underground excavations. Early strength gain of the shotcrete is a crucial aspect for ground support and safety of operatives. Strength requirements are dependent on various factors such as lining thickness, ground type, excavation size and tunnel depth. The early strength gain is typically ...
متن کاملNon-destructive Evaluation (nde) of Space Application Panels Using Piezoelectric Wafer Active Sensors
Ultrasonic guided waves inspection using Lamb waves is suitable for damage detection in metallic structures. This paper will present experimental results obtained using guided Lamb waves to detect flaws in aluminum specimens with design features applicable to space applications. Two aluminum panels were fabricated from a variable-thickness aluminum top plate, with two bolted I-beams edge stiffe...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Mathematical Modelling
سال: 1990
ISSN: 0307-904X
DOI: 10.1016/0307-904x(90)90113-j