NDE of an Inclined Crack Using Extremely Adjacent Probes for DCPD Technique.
نویسندگان
چکیده
منابع مشابه
Advancement of the Closely Coupled Probes Potential Drop Technique for Nde of Surface Cracks
Abstract: DCPD technique is powerful tool for quantitative NDE of cracks. The technique using four probes which are in close proximity to each other has been proposed for NDE of surface cracks; that is the closely coupled probes potential drop (CCPPD) technique. It has been shown that the sensitivity of the CCPPD technique is enhanced significantly in comparison with the usual method. The objec...
متن کاملPrediction of Crack Initiation Direction for Inclined Crack Under Biaxial Loading by Finite Element Method
This paper presents a simple method based on strain energy density criterion to study the crack initiation angle by finite element method under biaxial loading condition. The crack surface relative displacement method is used to eliminate the calculation of the stress intensity factors which are normally required. The analysis is performed using higher order four node quadrilateral element. The...
متن کاملLaser Photoacoustic Technique for NDE
The technique of laser photoacoustic spectroscopy is applied to the studies of surface and sub-surface structures of solids in a nondestructive fashion. In the present case, special attention is focused on reaction-bonded Si N ceramics, which are used for the manufacturing of turbine blades. Good correlation is obtained betwee~ fhe observed photoacoustic signal and surface microstructures. In a...
متن کاملCrack Interaction Studies Using XFEM Technique
In this paper, edge crack problems under mechanical loads have been analysed using extended finite element method (XFEM) as it has proved to be a competent method for handling problems with discontinuities. The XFEM provides a versatile technique to model discontinuities in the solution domain without re-meshing or conformal mesh. The stress intensity factors (SIF) have been calculated by domai...
متن کاملAn Investigation into the Performance of Excavation with Inclined Struts Connected to Adjacent Buildings
One practical excavation support system is the inclined struts connected to adjacent buildings. This method is very common in small excavations, because of simplicity and minimum cost, when soil is cohesive and depth of excavation is less than stability depth (Hcr) but adjacent structures is at risk of damage due to weakness, old age or lack of proper skeleton frame. Although this method ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A
سال: 1996
ISSN: 0387-5008,1884-8338
DOI: 10.1299/kikaia.62.63