NEAR INFRARED – EMITTING Zn2SiO4 POWDERS PRODUCED BY HIGH-ENERGY PLANETARY BALL MILLING TECHNIQUE
نویسندگان
چکیده
منابع مشابه
EVect of high energy ball milling on titanium– hydroxyapatite powders
to bone are concerned are brittle materials as exempli ed by hydroxyapatite and ‘Bioglass’. Bioactive coatings are This paper reports on an investigationof the potential employed on metal implants to facilitate bonding to bone use of high energy ball milling (HEBM) for the while retaining the good combination of mechanical production of homogeneous mixtures of titanium/ properties associated w...
متن کاملAl4C3/Ag Formation in an Aluminum Composite Produced by High-Energy Ball Milling
Aluminum and its alloys have a lot of industrial applications due to their appropriate physical and chemical characteristics. However, those present a modest mechanical performance. One method to improve its strenght is the addition of hard insoluble particles as: carbides (Al4C3, TiC), oxides (Al2O3) or nitrides (TiN, AlN), which can difficult the dislocation movement at atomic level, resultin...
متن کاملFormation of glassy Ti50Cu20Ni24Si4B2 alloy by high-energy ball milling
The elemental powder mixtures with a nominal composition of Ti50Cu20Ni24Si4B2 can be amorphized under high-energy ball milling. A well-defined glass transition before crystallization appears in the obtained amorphous phase during heating in a differential scanning calorimeter. Awide supercooled liquid region DTx is available to be about 57 K. Crystallization of the ballmilled amorphous phase wa...
متن کاملMechanical milling of aluminum powder using planetary ball milling process
Mechanical alloying has recently attracted considerable attention as researchers strive to enhance nanocomposite properties and extend their utility. The process can be performed at room temperature and homogeneous nanocomposite powders can be produced. In this paper, we investigated the effect of different ball milling parameters and operating conditions (milling time, ball size, processing co...
متن کاملSintering and Characterizations of WC-20wt.% (Fe,Co) Nano-Structured Powders Developed by Ball-Milling
The aim of the present work is to study the effects of the nanostructured WC-20 wt. % (Fe,Co) with different ratios of iron to cobalt on the microstructure and hardness of sintered samples. Furthermore, a sample with a cobalt binder under the same condition was produced for the comparison purposes. The nanocomposite development, after different milling times, has been monitored by means of X-ra...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Vietnam Journal of Science and Technology
سال: 2018
ISSN: 2525-2518,2525-2518
DOI: 10.15625/2525-2518/56/1a/12525