Net-Shape Preform Manufacture using Automated Fibre Placement
نویسندگان
چکیده
منابع مشابه
Near Net Shape Rapid Manufacture & Repair by LENS
Components and systems manufactured from advanced materials such as titanium alloys, superalloys or special steels are critical to the performance of the armed forces. However, utilising performance materials presents several challenges. By their very nature, they are difficult, costly and time consuming to process. The main manufacturing routes of casting, forging and machining typically exhib...
متن کاملHeat transfer within a microstructured polymer optical fibre preform
Preform heating is one of the most important steps in the polymer fibre fabrication process due to the potential distortion that can be introduced when exposing the structure to high temperatures. Such heating is further complicated when internal air-structures are introduced into the preform such as in Microstructured Polymer Optical Fibre (MPOF) preforms. The aim of this study was thus to inv...
متن کاملNet shape Functional Parts Using Diode Laser
Manufacturing processes, such as cutting, drilling, soldering, marking, forming 3Dsintered parts from metal powders and laser vapor deposition, are now well established practices using matured high power lasers like Nd:YAG, C02 and Excimer lasers(l). These lasers are bulky, inefficient and expensive. Semiconductor diode lasers, if wavelength is not a disadvantage, hold the potential of creating...
متن کاملShape optimization and preform design in metal forming processes
A continuum sensitivity analysis is presented for the computation of the shape sensitivity of ®nite hyperelastic±viscoplastic deformations involving contact with friction using a direct dierentiation method. Weak shape sensitivity equations are developed that are consistent with the kinematic analysis, constitutive sub-problem as well as the analysis of the contact/friction sub-problem used in...
متن کاملPreform Shape Optimization of Connecting Rod Using Finite Element Method and Taguchi Method
Preform design in forging processes is an important aspect for improving the forging quality and decreasing the production cost. The objective of this paper is to obtain an optimal perform shape in the consideration of the influence of the metal flow deformation in closed die forging process. Finite element method based DEFORMTM 3D software in conjunction with Taguchi method has been used to si...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advanced Composites Letters
سال: 1995
ISSN: 2633-366X,2633-366X
DOI: 10.1177/096369359500400404