Neutron activations for lower s-process temperatures
نویسندگان
چکیده
The slow neutron capture process produces heavy elements in different stellar sites at temperatures. Neutron cross sections for temperatures between k B T = 5 keV and 100 are crucial a quantitative understanding of the s-process abundance distribution. Over last decade activation measurements were performed Goethe University Frankfurt to study temperature 25 keV. We developed new method measure 6
منابع مشابه
Thermostat for Lower Temperatures
Details are given concerning the construction and operation of relatively simple thermostats which permit maintaining precise temperatures down to 0 degrees C. (with water), or temperatures above that of the ordinary room, and in which the temperature may be quickly altered at short intervals to new levels.
متن کاملExperiments with neutron beams for the astrophysical s process
Neutron capture cross sections are the key nuclear physics input to study the slow neutron capture process, which is responsible for forming about half of the elemental abundances above Fe. Stellar neutron capture cross section can be measured by the time-of-flight technique, or by activation. Both techniques will be discussed and recent experiments in the Fe/Ni mass region will be presented.
متن کاملStellar neutron capture rates – key data for the s process
Neutron reactions are responsible for the formation of the elements heavier than iron. The corresponding scenarios relate to the Heand Cburning phases of stellar evolution (s process) and to supernova explosions (r and p processes). The s process, which is characterized by low neutron densities, operates in or near the valley of β-stability and has produced about half of the elemental abundance...
متن کاملASTROPHYSICAL NEUTRON CAPTURE RATES IN s– AND r–PROCESS NUCLEOSYNTHESIS
Astrophysical neutron capture rates of light and heavy nuclei have been measured and calculated. For the measurements the activation technique was applied at the 3.75 MV Karlsruhe Van de Graaff accelerator, and at the Geel electron linear accelerator (GELINA) the time–of–flight (TOF) method was used. The calculations were performed using direct and compound nuclear capture models.
متن کاملNitriding iron at lower temperatures.
The microstructure in the surface layer of a pure iron plate was refined at the nanometer scale by means of a surface mechanical attrition treatment that generates repetitive severe plastic deformation of the surface layer. The subsequent nitriding kinetics of the treated iron with the nanostructured surface layer were greatly enhanced, so that the nitriding temperature could be as low as 300 d...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Epj Web of Conferences
سال: 2023
ISSN: ['2101-6275', '2100-014X']
DOI: https://doi.org/10.1051/epjconf/202327906011