New experimental set-up to approach pipeline fracture behaviour by three-point bending specimens
نویسندگان
چکیده
منابع مشابه
Flexural Properties and Fracture Behavior of Nanoporous Alumina film by Three-Point Bending Test
This study investigated the influence of porosity on the flexural property of a nanoporous alumina film. When the porosity of the alumina film increased, both bending strength and modulus declined. The results from the bending test revealed that the setting of the film during the bending test had significant influence on the flexural property. Fracture only occurred when the porous side of the ...
متن کاملUsing Finite Element Software to Simulation Fracture Behavior of Three-point Bending Beam with Initial Crack
using computation software to simulate fracture behaviors of structures can shorten the time to estimate safety of engineering structures and reduce a lot of cost of experiment. However three dimensional numerical simulation for fracture process is a challenging issue, because the convergence and accuracy are not easily obtained and high computational cost is generated. In this paper, three new...
متن کاملPart A- Experimental: Experimental Analysis of Crack Propagation in Pre-stressed Concrete Sleepers by Fracture Mechanics
This study investigates propagation of mode I crack in B70 pre-stressed concrete sleepers by fracture mechanics approach. A new experimental analysis is done for notched B70 pre-stressed concrete sleepers with Replica test and image analysis. A scanning electron microscope test (SEM) and an image analysis are applied for the Replica test in order to determine crack length and crack mouth openin...
متن کاملThree-Point Bending Fracture Behavior of Single Oriented Crossed-Lamellar Structure in Scapharca broughtonii Shell
The three-point bending strength and fracture behavior of single oriented crossed-lamellar structure in Scapharca broughtonii shell were investigated. The samples for bending tests were prepared with two different orientations perpendicular and parallel to the radial ribs of the shell, which corresponds to the tiled and stacked directions of the first-order lamellae, respectively. The bending s...
متن کاملExperimental investigation of static and fatigue behaviour of composites honeycomb materials using four point bending tests
In this study static and fatigue behaviours of honeycomb sandwich composites, made of aramide fibres and aluminium cores, are investigated through four-point bending tests. Damage and failure modes are reported and discussed. Global and local parameters were considered to evaluate the fatigue life of the analysed sandwich composites. Effects of core densities and the cell orientation (L or W) o...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Fatigue & Fracture of Engineering Materials & Structures
سال: 2012
ISSN: 8756-758X
DOI: 10.1111/j.1460-2695.2012.01650.x