Next Generation X-ray Mirrors
نویسندگان
چکیده
منابع مشابه
Next Generation X-ray Detectors for In-house Xrd
A novel type X-ray detector, called PILATUS, has been developed at the Paul Scherrer Institut (PSI) in Switzerland during the last decade. PILATUS detectors are two-dimensional hybrid pixel array detectors, which operate in single-photon counting mode. PILATUS detectors feature a very wide dynamic range (1:1,000,000), very short read out time (< 3.0 msec), no readout noise, and very high counti...
متن کاملBifocal Miniature Toroidal Shaped X-ray Mirrors
We have fabricated a bifocal miniature torodial mirror that horizontally and vertically focuses to two different locations to provide a smaller footprint of beam for grazing-incidence wide-angle scattering (GIWAXS), while at the same time focusing the beam in the horizontal direction on the detector to further enhance the angular resolution. At CHESS we traditionally use glass single-bounce mon...
متن کاملFabrication of X-ray Microscope Mirrors
We showed the design of a Wolter type I mirror which was optimized to have a maximum effective solid angle used in X-ray microscopes, and fabricated the mirror using the replication method. Several mirrors were successfully fabricated using only one master mandrel by our replication method without destroying the master mandrel. The replicated Au focusing and imaging mirrors showed surface rough...
متن کاملAn X-ray harmonic separator for next-generation synchrotron X-ray sources and X-ray free-electron lasers
An X-ray prism for the extraction of a specific harmonic of undulator radiation is proposed. By using the prism in a grazing incidence geometry, the beam axes of fundamental and harmonics of undulator radiation are separated with large angles over 10 µrad, which enables the selection of a specific harmonic with the help of apertures, while keeping a high photon flux. The concept of the harmonic...
متن کاملSilicon nitride transmission X-ray mirrors
Transmission X-ray mirrors have been fabricated from 300-400 nm-thick low-stress silicon nitride windows of size 0.6 mm x 85 mm. The windows act as a high-pass energy filter at grazing incidence in an X-ray beam for the beam transmitted through the window. The energy cut-off can be selected by adjusting the incidence angle of the transmission mirror, because the energy cut-off is a function of ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society for Precision Engineering
سال: 2018
ISSN: 0912-0289,1882-675X
DOI: 10.2493/jjspe.84.489