NI-AL POWDER MIXTURE INITIATION DURING SHOCK-WAVE LOADING AND HEAT TREATMENT
نویسندگان
چکیده
منابع مشابه
Phase Changes in Ni-ti under Laser Shock Loading
Near-equiatomic Ni-Ti, known for its shape memory behavior, can decompose to martensitic phases and/or second phase compounds. This phase competition is investigated in NixTi100-x (49<x<55) in as-quenched (AQ) and shock-loaded states. Dynamic loading was done with direct drive laser pulses of nanosecond duration; shocked samples were recovered for analysis. Unexpectedly, the lowest-Ni alloy (x ...
متن کاملOptimization of Composition and Heat Treatment of Age-Hardened Pt-Al-Cr-Ni Alloys
GRATZEL and R. VÖLKL, Metall. Mater. Trans., 2005, 36A, 681–689 Pt-base alloys (1) with various contents of Al, Cr and Ni were arc melted. Solution heat treatments at 1450oC followed by water quenching gave single phase alloys. Ageing at 1000oC caused the precipitation of L12 ordered particles. (1), comprising (in at.%): 11 Al; 3 Cr; 6 Ni and balance Pt, had cuboidal precipitates with edge leng...
متن کاملObservation of a Minimum Reaction Initiation Threshold in Ball-Milled Ni + Al Under High-Rate Mechanical Loading
Distribution A: Approved for public release; distribution unlimited. Approval Confirmation 96 ABW/PA # 96ABW-2010-0451, dated August 12, 2010 This paper was published in the Journal of Applied Physics, March 2011. One or more of the authors is a U.S. Government employee working within the scope of their position; therefore, the U.S. Government is joint owner of the work and has the right to cop...
متن کاملTHE FORMATION OF TiAl3 DURING HEAT TREATMENT IN EXPLOSIVELY WELDED Ti-Al MULTILAYERS
Metallic-intermetallic laminate (MIL) composites are promising materials for structural applications especially in the aerospace industry. One of the interesting laminate composites is the Ti-TiAl 3 multilayer. In this work, commercially pure sheets of aluminum and titanium with almost equal thickness of around 0.5 mm were explosively joined. The achieved multilayers were annealed at 630 ℃in di...
متن کاملCreep of Ni-Al and Ni-Cr-Al Superalloy Foams
The steady-state creep rate of Ni-base metallic foams, with superalloy composition (in wt. pct) Ni7.8∼9.1Al (relative density, ρ = 2.5-2.6) and Ni-13.5∼16.6Cr-5.1∼8.9Al (ρ = 2.8∼3.0), was measured under a range of temperatures (680∼825°C) and applied stresses (0.1∼0.3 MPa), and compared with that of NiAl intermetallic foams (ρ = 5.3). The stress exponent and activation energy are within the exp...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IZVESTIA VOLGOGRAD STATE TECHNICAL UNIVERSITY
سال: 2020
ISSN: 1990-5297
DOI: 10.35211/1990-5297-2020-11-246-77-80