Ni-Mo Alloys with a High Molybdenum Content Using Pulse-Plating Method
نویسندگان
چکیده
منابع مشابه
Application of Pulse Plating - Amorphous Alloys
Amorphous alloys can be electrodeposited by direct or pulsed current. According to electrocrystallization theory, a high crystallization overpotential produces microcrystalline structure in the deposits. Thus if the amorphous phase consists of microcrystals, pulsed current is preferable for preparing amorphous alloys. However, another newly proposed theory holds that the amorphous phase structu...
متن کاملA Novel Electrodeposition Process for Plating Zn-Ni-Cd Alloys
Zn-Ni-Cd alloy was electrodeposited from an alkaline electrolytic bath under potentiostatic conditions. Bath analyses using a pH concentration diagram reveal that addition of a complexing agent is essential to maintain the bath stability. Introduction of a low concentration of CdSO4 reduces the anomalous nature of the Zn-Ni deposit. Deposits obtained from the electrolytic bath which contains 60...
متن کاملHigh Magnetic Permeability Alloys Hardperm in the Ni-Fe-Ta-Mo System*
Starting materials used were 99.8% pure nickel, 99.9% pure iron, 99.9% pure tantalum, and 99.9% pure molybdenum. The materials in a total weight of 500g were melted with a high-frequency induction furnace in vacuum. The melt was poured into an iron mold with an opening of 20mm diameter and 150mm length. After forging, the ingot was reduced to a thin plate 0.3mm in thickness by rolling and a wir...
متن کاملNanostructured high-strength molybdenum alloys with unprecedented tensile ductility.
The high-temperature stability and mechanical properties of refractory molybdenum alloys are highly desirable for a wide range of critical applications. However, a long-standing problem for these alloys is that they suffer from low ductility and limited formability. Here we report a nanostructuring strategy that achieves Mo alloys with yield strength over 800 MPa and tensile elongation as large...
متن کاملZinc-Nickel Binary Alloys Electrodeposition of Steel Using Pulse Current
Zinc-Nickel electrodeposits have been widely adopted for surface treatment of automobile steel sheet for high corrosion resistance. In this work the effect of pulse parameters on the Zn-Ni alloy electrodeposits was investigated. The hardness, thickness, corrosion resistance and composition of deposits thus produced were investigated. The surface topography of the deposits was also observed in S...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Denki Kagaku oyobi Kogyo Butsuri Kagaku
سال: 1998
ISSN: 0366-9297,2434-2556
DOI: 10.5796/kogyobutsurikagaku.66.754