Nickel dot coating of NbC powder by solution processing
نویسندگان
چکیده
منابع مشابه
solution of security constrained unit commitment problem by a new multi-objective optimization method
چکیده-پخش بار بهینه به عنوان یکی از ابزار زیر بنایی برای تحلیل سیستم های قدرت پیچیده ،برای مدت طولانی مورد بررسی قرار گرفته است.پخش بار بهینه توابع هدف یک سیستم قدرت از جمله تابع هزینه سوخت ،آلودگی ،تلفات را بهینه می کند،و هم زمان قیود سیستم قدرت را نیز برآورده می کند.در کلی ترین حالتopf یک مساله بهینه سازی غیر خطی ،غیر محدب،مقیاس بزرگ،و ایستا می باشد که می تواند شامل متغیرهای کنترلی پیوسته و گ...
An Investigation of Formulation Factors and Processing Parameters for the Powder-Coating of Tablets
The aim of this study was to develop a dry powder coating process for chlorpheniramine maleate (CPM) tablets using Eudragit L 100-55 as the delayed release polymer. Powder coating, a water and organic solvent-free process, was investigated as a method to prevent the migration of an ionizable, highly water soluble model drug into the polymeric film during the coating process. Eudragit L 100-55 w...
متن کاملEquilibrium and Kinetic Study of Adsorption of Nickel from Aqueous Solution onto Bael Tree Leaf Powder
The ability of bael tree (BT) leaf powder to adsorb nickel, Ni, from aqueous solutions has been investigated through batch experiments. The Ni adsorption was found to be dependent on adsorbent dosage, initial concentration and contact time. All batch experiments were carried out at natural solution pH and at a constant temperature of 30°C using wrist-action shaker that operated at 120 rpm. The ...
متن کاملremoval of heavy metal by nickel oxide nano powder
in this study metal oxide nano powder namely nio nanopowder was prepared .the producedmetal oxide was characterized and used as potential adsorbent for the removal of pb and zn from aqueoussolution. the rate of uptake of the pb and zn are rapid in the beginning and the time required for equilibrium adsorption is 120 min .the time of equilibrium as well as time required to achieve a definite fra...
متن کاملTHE STUDY OF ELECTROLESS COATING OF NICKEL ON CARBON FIBERS
The continuity and thickness of the coating layer, are the most important factors in wetting properties and strength of carbon fibers. These factors are crucial in the quality of metal matrix composites made with carbon fibers. In this research the Polyacrylonitrail base carbon fibers have been nickel coated with 0.2, 0.5, 0.8 and 11 ,u in thickness, by the electroless method. The effect of the...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Open Ceramics
سال: 2020
ISSN: 2666-5395
DOI: 10.1016/j.oceram.2020.100043