Nickel-zinc ferrite/permalloy (Ni0.5Zn0.5Fe2O4/Ni-Fe) soft magnetic nanocomposites fabricated by electro-infiltration
نویسندگان
چکیده
منابع مشابه
Fabrication of Soft Magnetic Fe-based Nanoalloy
The Fe-Ni-Sb-B amorphous alloy has been prepared by a solid-solid chemical reaction of ferric trichloride, nickel chloride, antimony chloride and potassium borohydride powders at room temperature. The inductive couple plasma study indicates that the resultant is composed of Fe 5.38 %, Ni 56.19 %, Sb 29.02 % and B 0.44 %. The XRD and thermal analysis show that the alloy is a non-strict sense amo...
متن کاملCHARACTERIZATION OF CO-FE MAGNETIC FILMS FABRICATED BY GALVANO-STATIC ELECTRODEPOSITION
In this research, nanocrystalline Co-Fe coatings were electrodeposited on copper substrate. The influence of current density on different properties of the films at two pH levels was investigated. All the coatings showed nodular structure with rougher morphology at higher current densities. Due to anomalous deposition at higher current density, the amount of iron content increased and reached i...
متن کاملStructure-magnetic property correlations in nickel-polymer nanocomposites
Epoxy matrix nanocomposites with nickel nanoparticles of two different sizes were processed and characterized to investigate their structure-magnetic property correlations. Crystal structure, morphology, density, resistivity and magnetic properties of the nanocomposites with different filler contentswere compared for different size scales. Nanocomposites with 25 nm nanoparticles showed higher c...
متن کاملPorous Silicon Nanocomposites with Combined Hard and Soft Magnetic Properties
Magnetic nanostructures of two ferromagnetic metals have been combined within porous silicon, and the magnetic switching behavior of the resulting porous silicon/metal nanocomposite has been modified by varying the arrangement. The two magnetic materials are Ni and Co, whereas Co is the magnetic harder one. These "hard/soft" magnetic nanocomposites have been achieved by two different routes. On...
متن کاملZrB2-CNTs Nanocomposites Fabricated by Spark Plasma Sintering
ZrB₂-based nanocomposites with and without carbon nanotubes (CNTs) as reinforcement were prepared at 1600 °C by spark plasma sintering. The effects of CNTs on the microstructure and mechanical properties of nano-ZrB₂ matrix composites were studied. The results indicated that adding CNTs can inhibit the abnormal grain growth of ZrB₂ grains and improve the fracture toughness of the composites. Th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: AIP Advances
سال: 2016
ISSN: 2158-3226
DOI: 10.1063/1.4943415