Nitric Oxide Generator Based on Pulsed Arc Discharge
نویسندگان
چکیده
منابع مشابه
Nitric Oxide Generator Based on Pulsed Arc Discharge
Nitric oxide (NO) is increasingly being used in medical applications. Currently, a gas cylinder of N2 mixed with a high concentration of NO is used in the NO inhalation system. However, this arrangement is potentially risky due to the possibility of accidental leak of NO from the cylinder. The presence of NO in air leads to the formation of nitric dioxide (NO2), which is toxic to the lungs. The...
متن کاملMacroparticle Charging in a Pulsed Vacuum Arc Thruster Discharge
A pulsed vacuum arc discharge emits a plasma as well as macroparticles in the form of micron-sized molten droplets of cathode material. Due to their trajectory and size, these macroparticles often pose a contamination threat for both spacecraft-based thrusters, and thin film deposition systems. The charge of these macroparticles was experimentally measured, and compared to a model based on ther...
متن کاملNumerical studies of nitric oxide formation in nanosecond-pulsed discharge-stabilized flames of premixed methane/air.
A simulation is developed to investigate the kinetics of nitric oxide (NO) formation in premixed methane/air combustion stabilized by nanosecond-pulsed discharges. The simulation consists of two connected parts. The first part calculates the kinetics within the discharge while considering both plasma/combustion reactions and species diffusion, advection and thermal conduction to the surrounding...
متن کاملPulsed corona generation using a diode-based pulsed power generator
• A submitted manuscript is the author's version of the article upon submission and before peer-review. There can be important differences between the submitted version and the official published version of record. People interested in the research are advised to contact the author for the final version of the publication, or visit the DOI to the publisher's website. • The final author version ...
متن کاملStudy of Multilayer Coatings of Ti/TiN/TiC Produced by Pulsed Arc Discharge
This work presents a study of multilayered Ti/TiN/TiC thin films obtained using a PAPVD (Plasma Assisted Physical Vapor Deposition) system by pulsed-arc discharge. For this purpose, a titanium target and a stainless steel substrate were used, placed on the cathode and on the anode, respectively, inside a vacuum chamber. To grow these films, different gases and concentrations were required. Ti i...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Acta Physica Polonica A
سال: 2009
ISSN: 0587-4246,1898-794X
DOI: 10.12693/aphyspola.115.1104