Noise Control for Induced‐Draft Fan Installations
نویسندگان
چکیده
منابع مشابه
Session 1pEAa: Active and Passive Control of Fan Noise 1pEAa1. Active control of axial and centrifugal fan noise
Both axial and centrifugal fans are used to cool information technology (IT) equipment. These fans generate noise that can be annoying to their users, particularly the tonal noise that can be radiated. Work has focused on developing a method to attenuate the tonal noise associated with both of these types of fans. A compact system is used, whereby control sources are placed in close proximity t...
متن کاملMulti-channel Active Control of Axial Cooling Fan Noise
A multi-channel active control system has been applied to the reduction of free-field tonal noise from a small axial cooling fan, typical of those used in office equipment and other technology. The experimental apparatus consists of an aluminum enclosure which houses the fan, an infrared detector-emitter pair which serves as a reference sensor, loudspeakers, microphones, and appropriate filters...
متن کاملActive control of fan noise on a UHB engine
The model developed in this work was used to investigate the potential that active noise control techniques have for reducing fan noise on an ultra high bypass (UHB) turbofan engine. Active noise control is expected to perform differently on a UHB turbofan engine than on a conventional turbofan engine since the short and wide inlet duct inherent to the UHB engine promotes radiation from evanesc...
متن کاملNoise Source Identification for Ducted Fan Systems
Understanding combustion noise source mechanisms, designing efficient acoustic liners and optimising active control algorithms for noise reduction requires the identification of the frequency and modal content of the combustion noise contribution. Coherence-based noise source identification techniques have been developed which can be used to identify the contribution of combustion noise to near...
متن کاملExperimental Investigations of Different Microphone Installations for Active Noise Control in Ducts
A request on ventilation systems today is the feature of a low noise level. A common method to attenuate ventilation noise is to use passive silencers. However, such silencers are not suitable for the lowest frequencies and one solution is to use active noise control (ANC) to increase the noise attenuation in the low frequency range. Normally when using a feedforward ANC system to attenuate duc...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Journal of the Acoustical Society of America
سال: 1970
ISSN: 0001-4966
DOI: 10.1121/1.1973996