Noise reduction in CdZnTe coplanar-grid detectors
نویسندگان
چکیده
منابع مشابه
Coplanar grid CdZnTe detectors for space science applications
The characteristics and performance for two of the latest coplanar grid CdZnTe detectors, which use the thirdgeneration coplanar grid design, will be discussed. These detectors, with dimensions of 1.5×1.5×0.9 cm and 1.5×1.5×0.95 cm, were fabricated by Baltic Scientific Instruments, Ltd., using crystals from Yinnel Tech, Inc. The high μeτe product measured for these crystals will lead to improve...
متن کاملEfficiency at different interaction depths in large coplanar CdZnTe detectors
This paper presents some studies performed with a state of the art large volume, 1.5 cm diameter 1.0 cm thick, cylindrical CdZnTe coplanar detector with a new anode pattern design in the line of units previously reported. The absolute efficiency of the detector for different interaction depths is quantified. The detector’s ideal response is simulated with a Monte Carlo code and compared with ex...
متن کاملCharge sharing in common-grid pixelated CdZnTe detectors
The charge sharing effect in pixelated CdZnTe (CZT) detectors with a common anode steering grid has been studied. The impact on energy resolution of weighting potential cross-talk and ballistic deficit due to cathode signal shaping has been investigated. A detailed system modeling package considering charge induction, electronic noise, pulse shaping, and ASIC triggering procedures has been deve...
متن کاملNew Results from Performance Studies of Frisch-Grid CdZnTe Detectors
New data regarding performance studies of Frisch-grid CdZnTe (CZT) detectors are presented. The Frisch-grid detector configuration under investigation is a bar shaped CZT crystal with the side surfaces coated with an insulating layer. A Frisch grid is fashioned by inserting the CZT bar into a metallic sleeve, or by depositing the metal directly upon the insulator; hence the semiconductor materi...
متن کاملLow-noise custom VLSI for CdZnTe pixel detectors
A custom analog VLSI chip is being developed for the readout of pixellated CdZnTe detectors in the focal plane of an astronomical hard X-ray telescope. The chip is intended for indium bump bonding to a pixel detector having pitch near 0.5 mm. A complete precision analog signal processing chain, including charge sensitive preamplifier, shaping amplifiers and peak detect and hold circuit, is prov...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Transactions on Nuclear Science
سال: 2002
ISSN: 0018-9499,1558-1578
DOI: 10.1109/tns.2002.801515