Non-isothermal process of viscoelastic polymer fi lm casting
نویسندگان
چکیده
منابع مشابه
Meshless analysis of casting process considering non-Fourier heat transfer
Casting is considered as a major manufacturing process. Thermal analysis of a solidifying medium is of great importance for appropriate design of casting processes. The conventional governing equation of a solidifying medium is based on the Fourier heat conduction law, which does not account for the phase-lag between the heat flux and the temperature gradient. In this paper, the concept of phas...
متن کاملDesign of non-isothermal Process Water Networks
Despite the fact that many methods have been developed for the optimization of process water networks, solving the problem simultaneously considering heat recovery has rarely been addressed. This paper presents a new approach for the simultaneous synthesis and optimization of heat integrated water networks. The procedure is based on mixed integer non-linear mathematical programming (MINLP). A n...
متن کاملTransient non-isothermal model of a polymer electrolyte fuel cell
In this paper we present a one-dimensional transient model for the membrane electrode assembly of a polymer-electrolyte fuel cell. In earlier work e established a framework to describe the water balance in a steady-state, non-isothermal cathode model that explicitly included an agglomerate atalyst layer component. This paper extends that work in several directions, explicitly incorporating comp...
متن کاملViscoelastic properties of polymer solutions.
In a concentrated polymer solution, the entanglement of long-chain molecules results in a transient network structure, to which may be attributed certain aspects of the viscoelastic behavior of such a system. A suitable mechanical model for representing this network as a first approximation is a retarded Maxwell element with one spring and two dashpots. Experimental measurements of mechanical p...
متن کاملNumerical Modeling of Mold Filling and Curing in Non-Isothermal RTM Process (RESEARCH NOTE)
Resin Transfer Molding (RTM) is a composite manufacturing process. A preformed fiber is placed in a closed mold and a viscous resin is injected into the mold. In this paper, a model is developed to predict the flow pattern, extent of reaction and temperature change during filling and curing in a thin rectangular mold. A numerical simulation is presented to predict the free surface and its inter...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Plasticheskie massy
سال: 2019
ISSN: 0554-2901
DOI: 10.35164/0554-2901-2019-5-6-27-29