Non-linear mechanical properties and dynamic response of silicon nitride bioceramic

نویسندگان

چکیده

Natural spinal tissues have unique dynamic properties and it is crucial to investigate the full response of implants related biomedical materials ensure compatibility with host tissue. Silicon nitride a promising bioceramic for implants. In this study, mechanical silicon were comprehensively evaluated using novel efficient testing methods, at both material structural level. The correlation between porosity was investigated results showed that Young's modulus compressive strength decreased non-linearly as increased. Both (100.35±3.39MPa) fracture toughness (1.06±0.06MPa?m1/2) porous samples (~70% porosity) can be considered sufficient load bearing purposes substitute trabecular bone. Moreover, from drop tower test average ultimate scaffolds under an impact loading significantly lower than quasi-static compression. Nevertheless, value still comparable Regarding damping capacity, free damped vibration tests cantilever beams beam has higher ratio (0.17%±0.01%) zirconia (0.13%±0.01%), which indicates ceramics similar moduli different energy dissipating capacities. However, dense low dissipation, substantially natural tissues. Overall, possesses high stiffness, altering one option tailor its towards those bone, however, more effort required increase if desired trait.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

determination of some physical and mechanical properties red bean

چکیده: در این تحقیق، برخی خواص فیزیکی و مکانیکی لوبیا قرمز به-صورت تابعی از محتوی رطوبت بررسی شد. نتایج نشان داد که رطوبت بر خواص فیزیکی لوبیا قرمز شامل طول، عرض، ضخامت، قطر متوسط هندسی، قطر متوسط حسابی، سطح تصویر شده، حجم، چگالی توده، تخلخل، وزن هزار دانه و زاویه ی استقرار استاتیکی در سطح احتمال 1 درصد اثر معنی داری دارد. به طوری که با افزایش رطوبت از 54/7 به 12 درصد بر پایه خشک طول، عرض، ضخام...

15 صفحه اول

Mechanical properties of sputtered silicon nitride thin films

Silicon nitride thin films were prepared by reactive sputtering from different sputtering targets and using a range of Ar/N2 sputtering gas mixtures. The hardness and the Young’s modulus of the samples were determined by nanoindentation measurements. Depending on the preparation parameters, the obtained values were in the ranges 8–23 and 100–210 GPa, respectively. Additionally, Fourier-transfor...

متن کامل

Dynamic Simulation and Mechanical Properties of Microtubules

This work is conducted to obtain mechanical properties of microtubule. For this aim, interaction energy in alpha-beta, beta-alpha, alpha-alpha, and beta-beta dimers was calculated using the molecular dynamic simulation. Force-distance diagrams for these dimers were obtained using the relation between potential energy and force. Afterwards, instead of each tubulin, one sphere with 55 KDa weight ...

متن کامل

Elevated-Temperature Mechanical Properties of Silicon Nitride/Boron Nitride Fibrous Monolithic Ceramics

A unique, all-ceramic material capable of nonbrittle fracture via crack deflection and delamination has been mechanically characterized from 25° through 1400°C. This material, fibrous monoliths, was comprised of unidirectionally aligned 250 mm diameter silicon nitride cells surrounded by 10 to 20 mm thick boron nitride cell boundaries. The average flexure strengths of fibrous monoliths were 510...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Ceramics International

سال: 2021

ISSN: ['0272-8842', '1873-3956']

DOI: https://doi.org/10.1016/j.ceramint.2021.08.261