Non-polydimethylsiloxane devices for oxygen-free flow lithography
نویسندگان
چکیده
منابع مشابه
Non-polydimethylsiloxane devices for oxygen-free flow lithography.
Flow lithography has become a powerful particle synthesis technique. Currently, flow lithography relies on the use of polydimethylsiloxane microchannels, because the process requires local inhibition of polymerization, near channel interfaces, via oxygen permeation. The dependence on polydimethylsiloxane devices greatly limits the range of precursor materials that can be processed in flow litho...
متن کاملMold cleaning with polydimethylsiloxane (PDMS) for nanoimprint lithography
We present a simple and effective mold cleaning method for nanoimprint lithography. Polydimethylsiloxane (PDMS) prepolymer is spin-coated onto a contaminated imprint mold, thermally cured in ambient environment, and then peeled off afterwards. Contaminants of 100s m to sub-50 nm sizes are effectively cleaned within one cycle. During the cleaning process, a very thin PDMS film (1~2 nm) is unifo...
متن کاملSynthesis of biomimetic oxygen-carrying compartmentalized microparticles using flow lithography.
We report a microfluidic approach for lithographically photo-patterning compartmentalized microparticles with any 2D-extruded shape, down to the cellular length scale (~10 microns). The prepolymer solution consists of a UV crosslinkable perfluorodecalin-in-water nanoemulsion stabilized by Pluronic(®) F-68. The nanoemulsions are generated using high-pressure homogenization and are osmotically st...
متن کاملSynthesis of colloidal microgels using oxygen-controlled flow lithography.
We report a synthesis approach based on stop-flow lithography (SFL) for fabricating colloidal microparticles with any arbitrary 2D-extruded shape. By modulating the degree of oxygen inhibition during synthesis, we achieved previously unattainable particle sizes. Brownian diffusion of colloidal discs in bulk suggests the out-of-plane dimension can be as small as 0.8 μm, which agrees with confoca...
متن کاملFabrication of microfluidic devices using polydimethylsiloxane.
Polydimethylsiloxane (PDMS) is nearly ubiquitous in microfluidic devices, being easy to work with, economical, and transparent. A detailed protocol is provided here for using PDMS in the fabrication of microfluidic devices to aid those interested in using the material in their work, with information on the many potential ways the material may be used for novel devices.
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Nature Communications
سال: 2012
ISSN: 2041-1723
DOI: 10.1038/ncomms1800