Non-premixed swirl-type tubular flames burning liquid fuels
نویسندگان
چکیده
منابع مشابه
Synthesis of TiO2 nanoparticles by premixed stagnation swirl flames
A new turbulent, premixed, stagnation swirl flame (SSF) is used to synthesize titanium dioxide (TiO2) nanopowders. Synthesis conditions under two flame modes, i.e., burnerand substrate-stabilized SSF, are investigated, for the same equivalence ratio, but different inert-dilution ratios. The particles (collected on the substrate) have high anatase purity, with mean diameters of 5–10 nm, determin...
متن کاملCombustion dynamics of swirl-stabilized lean premixed flames in an acoustically-driven environment
Combustion instability is a process which involves unsteady chemical kinetic, fluid mechanic, and acoustic processes. It can lead to unstable behavior and be detrimental in ways ranging from faster part fatigue to catastrophic system failure. In terms of combustion methodology, combustion instability has been a key issue for lean premixed combustion. The primary objective of this work is to imp...
متن کاملSimulation of premixed turbulent flames
1. Introduction Premixed turbulent flames are of increasing practical importance and remain a significant research challenge in the combustion community. These flames have the potential to operate cleanly and efficiently over a broad range of fuels, and therefore to represent a key element in the implementation of low-emissions burners for a variety of industrial applications. However, it is di...
متن کاملexperimental study of cellular instabilities in non - premixed flames
A systematic experimental study was performed to elucidate the conditions for which cellular patterns of diluted hydrogen diffusion flames near extinction were observed. The formation of cellular instabilities was studied for several burners: jet burners (axisymmetric jet and two-dimensional jet) and a novel one-dimensional burner. The fuel and oxidizer Lewis numbers and the initial mixture str...
متن کاملOptical Emission Tomography of Non-axisymmetric, Laminar, Premixed Flames
Optical emission tomography of flames has recently been demonstrated as a practical experimental technique for determining the instantaneous position of a 3D flame surface. In this paper, optical emission tomography is applied to steady and forced, non-axisymmetric, premixed, laminar flames. An experimental set-up involving a single camera and a rotatable flame holder allows camera images from ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Fluid Mechanics
سال: 2018
ISSN: 0022-1120,1469-7645
DOI: 10.1017/jfm.2018.248