Nondestructive Determination of Stresses in Steel Components by Eddy Current Method
نویسندگان
چکیده
منابع مشابه
Design of Nondestructive System for Hardness of Carbonitrided Steel Parts Using Eddy Current Testing Method: Case study on the Tappet Parts
In this paper, a non-destructive eddy current test system was designed to evaluate the surface hardness of the carbonitrided steel parts. For this purpose, various samples of the tappet were used after the surface hardening and grinding operations as control samples and, if necessary, were subjected to destructive and non-destructive tests. Microstructural studies were performed with a microsco...
متن کاملEddy Current Tomography for Nondestructive Testing
The paper presents an eddy current tomography setup with high spatial resolution and high accuracy of measurements of signal on detection coil. In proposed solution both amplitude as well as phase shift are measured, which gives the possibility of calculation of spatial distribution of both permeability and resistivity of tested element. As a result, presented setup creates possibility of effec...
متن کاملQUALITY CONTROL OF PRECIPITATION HARDENED ALUMINIUM ALLOY PARTS VIA EDDY-CURRENT NONDESTRUCTIVE EVALUATION
Precipitation hardening is the most common method in the strengthening of aluminium alloys. This method relies on the decrease of solid solubility with temperature reduction to produce fine precipitations which impede the movement of dislocations. The quality control of aluminium alloy specimens is an important concern of engineers. Among different methods, non-destructive techniques are the...
متن کاملInverse Problem in Nondestructive Testing Using Arrayed Eddy Current Sensors
A fast crack profile reconstitution model in nondestructive testing is developed using an arrayed eddy current sensor. The inverse problem is based on an iterative solving of the direct problem using genetic algorithms. In the direct problem, assuming a current excitation, the incident field produced by all the coils of the arrayed sensor is obtained by the translation and superposition of the ...
متن کاملNondestructive Evaluation of Plates Using Eddy Current Methods
The problem of determining defects in structures using eddy current methods is investigated. The goal of this work is to assess the extent to which accurate quantitative information about damage can be extracted from the data. For simplicity, we consider the problem of inspecting a plate in two dimensions. Damage is modeled as a change in the plate's conductivity. Electromagnetic eld is generat...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Strojniški vestnik - Journal of Mechanical Engineering
سال: 2018
ISSN: 0039-2480
DOI: 10.5545/sv-jme.2018.5208