Nondestructive Examination of PHWR Pressure Tube Using Eddy Current Technique
نویسندگان
چکیده
منابع مشابه
Flaw Detection and Characterization of Pressure Tubes from CANDU PHWR using Eddy Current Methods
This paper presents a new type of eddy current transducer, send-receiver type, using the rotating magnetic field method. The forward problem was solved, the experimental results obtained for detection of different types of degradation have proved the capability to emphasize blisters, and garter springs location and tilt as well as hydrogen content. INTRODUCTION The nondestructive testing of met...
متن کاملNondestructive Evaluation of Plates Using Eddy Current Methods
The problem of determining defects in structures using eddy current methods is investigated. The goal of this work is to assess the extent to which accurate quantitative information about damage can be extracted from the data. For simplicity, we consider the problem of inspecting a plate in two dimensions. Damage is modeled as a change in the plate's conductivity. Electromagnetic eld is generat...
متن کاملInverse Problem in Nondestructive Testing Using Arrayed Eddy Current Sensors
A fast crack profile reconstitution model in nondestructive testing is developed using an arrayed eddy current sensor. The inverse problem is based on an iterative solving of the direct problem using genetic algorithms. In the direct problem, assuming a current excitation, the incident field produced by all the coils of the arrayed sensor is obtained by the translation and superposition of the ...
متن کاملEddy Current Tomography for Nondestructive Testing
The paper presents an eddy current tomography setup with high spatial resolution and high accuracy of measurements of signal on detection coil. In proposed solution both amplitude as well as phase shift are measured, which gives the possibility of calculation of spatial distribution of both permeability and resistivity of tested element. As a result, presented setup creates possibility of effec...
متن کاملQUALITY CONTROL OF PRECIPITATION HARDENED ALUMINIUM ALLOY PARTS VIA EDDY-CURRENT NONDESTRUCTIVE EVALUATION
Precipitation hardening is the most common method in the strengthening of aluminium alloys. This method relies on the decrease of solid solubility with temperature reduction to produce fine precipitations which impede the movement of dislocations. The quality control of aluminium alloy specimens is an important concern of engineers. Among different methods, non-destructive techniques are the...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Korean Society for Nondestructive Testing
سال: 2014
ISSN: 1225-7842
DOI: 10.7779/jksnt.2014.34.3.254