Non‐destructive testing method of micro‐debonding defects in composite insulation based on high power ultrasonic
نویسندگان
چکیده
منابع مشابه
application of upfc based on svpwm for power quality improvement
در سالهای اخیر،اختلالات کیفیت توان مهمترین موضوع می باشد که محققان زیادی را برای پیدا کردن راه حلی برای حل آن علاقه مند ساخته است.امروزه کیفیت توان در سیستم قدرت برای مراکز صنعتی،تجاری وکاربردهای بیمارستانی مسئله مهمی می باشد.مشکل ولتاژمثل شرایط افت ولتاژواضافه جریان ناشی از اتصال کوتاه مدار یا وقوع خطا در سیستم بیشتر مورد توجه می باشد. برای مطالعه افت ولتاژ واضافه جریان،محققان زیادی کار کرده ...
15 صفحه اولUltrasonic Nondestructive Testing Method for Evaluation of Annular Seals
Drilling boreholes is common practice in geotechnical and geoenvironmental investigations and in various other ex ploration, testing, and monitoring appli cations. When a casing is placed in a borehole an annular space is created be tween the casing and the surrounding soil. If not properly sealed, this annular space can be a potential path for trans port of contaminants in the subsurface e...
متن کاملNondestructive Testing of Wood Defects based on Stress Wave Technology
The wood samples were tested by the technique of stress wave, and the testing results were analyzed by using the statistic software of SPSS. The results showed that the length, density and knots of wood, the sizes of holes and numbers of holes have significant influence on propagation parameters and dynamic modulus of elasticity. Under the same specifications, the propagation time of the stress...
متن کاملWavelet Analysis Based Ultrasonic Nondestructive Testing of Polymer Bonded Explosive
Polymer Bonded Explosives (PBX) are well-known explosives for the weapons, especially for the parts of some important weapon. Generally, they first are modelled in cylinder. One of the most important issues in PBX cylinder properties is the detection of its flaw. Each PBX cylinder may have flaws that influence the security, machine-performance and other important physical or chemical performanc...
متن کاملHigher-Order Statistics-based Deconvolution of Ultrasonic Nondestructive Testing Signals
Pulse-echo reflection techniques are used for ultrasonic flaw detection in most commercial instruments. As the measured pulse echo signal is assumed to be the result of linearly convolving the defect impulse response (IR) with the measurement system response, the objective is thus, to remove the effect of the measurement system through a deconvolution operation and extract the defect impulse re...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: High Voltage
سال: 2019
ISSN: 2397-7264,2397-7264
DOI: 10.1049/hve.2019.0044