Nonlinear analysis of monolithic beam-column connections for reinforced concrete frames

Nonlinear Earthquake Analysis of Reinforced Concrete Frames with Fiber and Bernoulli-Euler Beam-Column Element

A beam-column element based on the Euler-Bernoulli beam theory is researched for nonlinear dynamic analysis of reinforced concrete (RC) structural element. Stiffness matrix of this element is obtained by using rigidity method. A solution technique that included nonlinear dynamic substructure procedure is developed for dynamic analyses of RC frames. A predicted-corrected form of the Bossak-α met...

Numerical Analysis of Cyclic Behavior of Beam-To-Column Bolted Connections in Steel Frames

This article considers the seismic behavior of beam-to-column joints in steel frames for different bolt arrangements by using of finite element modeling. As the most important beam-to-column joint type, the beam-to-column joints with end-plate is chosen for the analysis. Four different specimens have been analyzed. These models had some differences such as bolt arrangement and the presence or a...

Nonlinear Analysis of Reinforced Concrete Frames by a Combined Method

A more realistic and hence nonlinear analysis of reinforced concrete structures is becoming increasingly important. A combination of the displacement method, the transfer matrix method, and a crosssection module is suggested which leads to an effective analysis method for reinforced and prestressed concrete frames. The combined method considers both material and geometrical nonlinearities inclu...

Seismic Behavior of Beam Column Joints in Reinforced Concrete Moment Resisting Frames

Performance-based Optimization of Strut-and-tie Models in Reinforced Concrete Beam-column Connections

This paper presents the performance-based optimization of strut-and-tie models in reinforced concrete beam-column connections. The performance-based optimization (PBO) technique is employed to investigate optimal strut-and-tie models in reinforced concrete beam-column connections. Developing strut-and-tie models in reinforced concrete beam-column connections is treated as a topology optimizatio...