Nonlinear finite element analysis and modeling of a precast hybrid beam–column connection subjected to cyclic loads
نویسندگان
چکیده
منابع مشابه
response of coupled-precast shear walls subjected to cyclic loads
large panel precast structures are analyzed based on the connection rigidity. however, the connections undergo nonlinear and inelastic response, when subjected to seismic loads. thus, to study the actual behavior of structure, the connection nonlinearity should be implemented in the joints. in this paper, three conventional connection types are modeled based on the envelope of their cyclic resp...
متن کاملFinite element analysis of precast hybrid-steel concrete connections under cyclic loading
In this paper, a nonlinear finite element (FE) analysis of hybrid-steel concrete connections is presented. The detailed experimental results of the four full-scale hybrid-steel concrete connections with limited seismic detailing have been discussed in a different paper. However, due to the inherent complexity of beam–column joints and the unique features of the tested specimens, the experimenta...
متن کاملA Comparative Study of a Piping System Subjected to Earthquake Loads Using Finite Element Modeling and Analysis
This paper discusses the accuracy of a finite element model of a coupled piping system subjected to earthquake loads, as well as the differences in seismic behavior between coupled and welded piping system models. The test setup of a Victaulic coupled piping system tested at Lehigh University was modeled and analyzed with finite element methods. Two models were developed: (1) a welded pipe mode...
متن کاملFinite element analysis of a rigid beam to column connection reinforced with channels
Abstract: This research work presents a new rigid connection constructed with channels. In order to assess its hysteresis behavior, three specimens with different cover plates and six specimens with different panel zone thickness have been considered. The energy absorbed by the connection and the behavior of the panel zone were studied during cyclic loading and compared with those of connectio...
متن کاملFinite Element Analysis of Aluminum Honeycombs Subjected to Dynamic Indentation and Compression Loads
The mechanical behavior of aluminum hexagonal honeycombs subjected to out-of-plane dynamic indentation and compression loads has been investigated numerically using ANSYS/LS-DYNA in this paper. The finite element (FE) models have been verified by previous experimental results in terms of deformation pattern, stress-strain curve, and energy dissipation. The verified FE models have then been used...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Mathematical Modelling
سال: 2010
ISSN: 0307-904X
DOI: 10.1016/j.apm.2009.11.020