Nonloading Vibration Pickup Utilizing an Ultrasonic Carrier Beam
نویسندگان
چکیده
منابع مشابه
Microparticle trapping in an ultrasonic Bessel beam.
This paper describes an acoustic trap consisting of a multi-foci Fresnel lens on 127 μm thick lead zirconate titanate sheet. The multi-foci Fresnel lens was designed to have similar working mechanism to an Axicon lens and generates an acoustic Bessel beam, and has negative axial radiation force capable of trapping one or more microparticle(s). The fabricated acoustic tweezers trapped lipid part...
متن کاملThe Design of Beam Pickup and Kickers
The behavior of beam pickup and kickers subjected to the electromagnetic fields of relativistic charged particles is examined. The concept of image currents is explained. The frequency domain response of a simple stripline pickup is derived and the behavior of kickers is explained through Lorentz reciprocity.
متن کاملPrefabricated flap size limitations utilizing an omental carrier.
Several researchers and clinicians have taken advantage of the omentum's rich vascular arcades to support skin grafts. We have previously described an experimental model using the omentum as a vascular carrier for prefabricated free flaps in the rat. In this study, we used this model to compare three different sizes of free flaps using the same size omental carrier. Twenty-four male Sprague-Daw...
متن کاملfree transverse vibration of an inflated pressurised cantilever beam.
the fundamental natural frequency of vibration of an inflatable cantilever beam is computed from the system of the three equeations given for vibratory motion of the beam. the effect of various parameters is discussed, and it is shown that, as internal pressure increases, fundamental natural frequency will increase , indicating the stiffening characteristics of internal pressure. a single exper...
متن کاملInfluence of ultrasonic vibration on micro-extrusion.
Micro-forming is a miniaturization technology with great potential for high productivity. Some technical challenges, however, need to be addressed before micro-forming becomes a commercially viable manufacturing process. These challenges include severe tribological conditions, difficulty in achieving desired tolerances, and short tool-life due to inability of available die materials to withstan...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Journal of the Acoustical Society of America
سال: 1955
ISSN: 0001-4966
DOI: 10.1121/1.1917984