Nonuniform Heat Transfer Model and Performance of Molten Salt Cavity Receiver
نویسندگان
چکیده
منابع مشابه
Mhd Effects on Heat Transfer in a Molten Salt Blanket
Heat transfer in closed channel flows of molten salts (MS)s, such as FLiBe or FLiNaBe, has been considered under specific reactor conditions. MHD effects have been accessed for two blanket concepts: self-cooled MS blanket, and dual-coolant MS blanket. The effect of heat transfer degradation due to turbulence reduction by a magnetic field in the First Wall channels of the selfcooled blanket was ...
متن کاملAssessment of a Molten Salt Heat Transfer Fluid in a Parabolic Trough Solar Field
An evaluation was carried out to investigate the feasibility of utilizing a molten salt as the heat transfer fluid (HTF) and for thermal storage in a parabolic trough solar field to improve system performance and to reduce the levelized electricity cost. The operating SEGS1 plants currently use a high temperature synthetic oil consisting of a eutectic mixture of biphenyl/diphenyl oxide. The sco...
متن کاملSpecific heat capacity of molten salt-based alumina nanofluid
There is no consensus on the effect of nanoparticle (NP) addition on the specific heat capacity (SHC) of fluids. In addition, the predictions from the existing model have a large discrepancy from the measured SHCs in nanofluids. We show that the SHC of the molten salt-based alumina nanofluid decreases with reducing particle size and increasing particle concentration. The NP size-dependent SHC i...
متن کاملTransient Modelling of Cavity Receiver Heat Transfer for the Compact Linear Fresnel Reflector
An investigation into unsteady flow patterns in the cavity receiver of the Compact Linear Fresnel Reflector was performed using computational methods. Results indicate that periodic or even chaotic flow patterns may occur for some conditions and cavity designs. However, the results indicate that unsteadiness in the flow structure does not result in significant variation in the over heat loss ra...
متن کاملNumerical Study of Flow and Heat Transfer in a Square Driven Cavity
A numerical approach called “SIMPLER” is used to investigate the flow and heat transfer characteristics in a square driven cavity. The two-dimensional incompressible Navier-Stokes equations were solved and the results are depicted as contour plots of stream function, vorticity, and total pressure for Reynolds numbers from 1 to 10000. At the higher values of Reynolds number, an inviscid core re...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Energies
سال: 2020
ISSN: 1996-1073
DOI: 10.3390/en13041001