Notch failure versus interior failure for mixed-mode in-plane loading
نویسندگان
چکیده
منابع مشابه
The Effect of Inclined U-Notch Geometry on Mode Ratio (KII/KI) under Mixed Mode (I + II) Loading
In inclined U-notches, the mixed mode (I + II) loading occurs and the mode ratio can be increased by varying the notch angle. In this paper, the effect of the inclined U-notch geometry, i.e. the notch depth, the notch angle, the notch root radius, and the position of the notch with respect to supports, on the mode ratio (KII/KI) have been studied. Three-point bending and plane strain condition ...
متن کاملA failure criterion for brittle elastic materials under mixed-mode loading
The failure criterion of Leguillon at reentrant corners in brittle elastic materials (Leguillon 2002, Eur J Mech A/Solids 21: 61–72; Leguillon et al. (2003), Eur J Mech A—Solids 22(4): 509–524) validated in (Yosibash et al. 2004, Int J Fract 125(3–4): 307–333) for mode I loading is being extended to mixed mode loading and is being validated by experimental observations. We present an explicit d...
متن کاملStrategy Formulation for Service Failure Recovery, Using Mixed Research Method
The purpose of this study is to explain the strategies affecting the failure recovery in significant services which researches had previously disregarded. Since more than half of the total global wealth comes from the service sector, this study gains importance. Service failures and failed recoveries are among the leading causes of customer switching behavior from service organizations. The exi...
متن کاملAnalysis of Multiple Yoffe-type Moving Cracks in an Orthotropic Half-Plane under Mixed Mode Loading Condition
The present paper deals with the mixed mode fracture analysis of a weakened orthotropic half-plane with multiple cracks propagation. The orthotropic half-plane contains Volterra type glide and climb edge dislocations. It is assumed that the medium is under in-plane loading conditions. The distributed dislocation technique is used to obtain integral equations for the dynamic problem of multiple ...
متن کاملMulti-factor failure mode critically analysis using TOPSIS
The paper presents a multi-factor decision-making approach for prioritizing failure modes as an alternative to traditional approach of failure mode and effect analysis (FMEA). The approach is based on the ‘technique for order preference by similarity to ideal solution’ (TOPSIS). The priority ranking is formulated on the basis of six parameters (failure occurrence, non-detection, maintainability...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Solids and Structures
سال: 2018
ISSN: 0020-7683
DOI: 10.1016/j.ijsolstr.2018.06.014