Novel Dynamic Model Updating Technique for Damped Mechanical System
نویسندگان
چکیده
منابع مشابه
Frf-based Finite Element Model Updating Method for Non-viscous and Non-proportional Damped System
The modeling of damping is very complex and still considered somewhat an unknown or grey area. Recently, model updating methods has been used to update the damping matrix based on measured dynamic test data to accurately represent energy dissipation mechanism in dynamic systems. Most of the finite element updating methods considers that the dynamic systems are viscous and proportional. In this ...
متن کاملDamped DQE Model Updating of a Three-Story Frame Using Experimental Data
In this paper, following a two-stage methodology, the differential quadrature element (DQE) model of a three-story frame structure is updated for the vibration analysis. In the first stage, the mass and stiffness matrices are updated using the experimental natural frequencies. Then, having the updated mass and stiffness matrices, the structural damping matrix is updated to minimize the error be...
متن کاملAnalysis of Structural System Dynamic Model Updating Method
Model updating methods are successful in use of simulated data without noise, but inevitably lead to damaged uncorrelated noise levels and real experimental data, and it is often unpredictable. In this paper, the use of the frequency response function associated with re-analysis and updating of dynamic systems are proposed. Transformation matrix complexity and the normal frequency response func...
متن کاملA Technique for Dynamic Updating of Java Software
During maintenance, systems are updated to correct faults, improve functionality, and adapt the software to changes in its execution environment. The typical softwareupdate process consists of stopping the system to be updated, performing the update of the code, and restarting the system. For systems such as banking and telecommunication software, however, the cost of downtime can be prohibitiv...
متن کاملFinite element model updating of a geared rotor system using particle swarm optimization for condition monitoring
In this paper, condition monitoring of a geared rotor system using finite element (FE) model updating and particle swarm optimization (PSO) method is onsidered. For this purpose, employing experimental data from the geared rotor system, an updated FE model is obtained. The geared rotor system under study consists of two shafts, four bearings, and two gears. To get the experimental data, iezoel...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Theoretical and Applied Mechanics
سال: 2017
ISSN: 1314-8710,0861-6663
DOI: 10.1515/jtam-2017-0021