Novel Process for Carbon Cycle Utilization from Industrial Flue Gas into Methanol

Exergy and Energy Analysis of Effective Utilization of Carbon Dioxide in the Gas-to-Methanol Process

Two process models are used to convert carbon dioxide into methanol. These processes have been extended and improved using Aspen Plus simulator software. Both processes are found in the CO2 correction system. In this machine, the desired synthesis gas is produced in a flexible configuration. At the same time, the conversion of CO2 to hydrogen via a copper-based catalyst ha...

The thief process for mercury removal from flue gas.

The Thief Process is a cost-effective variation to activated carbon injection (ACI) for removal of mercury from flue gas. In this scheme, partially combusted coal from the furnace of a pulverized coal power generation plant is extracted by a lance and then re-injected into the ductwork downstream of the air preheater. Recent results on a 500-lb/h pilot-scale combustion facility show similar rem...

Utilization of carbon dioxide in industrial flue gases for the cultivation of microalga Chlorella sp.

The biomass and lipid productivity of Chlorella sp. MTF-15 cultivated using aeration with flue gases from a coke oven, hot stove or power plant in a steel plant of the China Steel Corporation in Taiwan were investigated. Using the flue gas from the coke oven, hot stove or power plant for cultivation, the microalgal strain obtained a maximum specific growth rate and lipid production of (0.827 d(...

Experimental Investigation and Modeling of Carbon Dioxide Adsorption from Model Flue gas

In this work, the adsorption of carbon dioxide from model flue gas on different adsorbents has been investigated. Using simplified modeling, parameters such as the total mass transfer coefficient and the effective diffusivity have been determined. Experiments were carried out in two sections: firstly, adsorption of pure carbon dioxide on different adsorbents was measured at pressures ranging fr...

A computational investigation on the structural features of alkanolamine solvents for CO2 capture process from power plant flue gas