NOx reduction by 13A/hydrogen mixed combustion using two-stage combustion
نویسندگان
چکیده
منابع مشابه
Low NOx Combustion Technology for Minimizing NOx
A noble low NOx combustion technology, based on partial oxidation combustion concept in a fuel rich combustion zone, is successfully applied in this research. The burner is designed such that a portion of fuel is heated and pre-vaporized in the furnace then injected into a fuel rich combustion zone so that a partial oxidation reaction occurs. The effects of equivalence ratio, thermal load, and ...
متن کاملNumerical Study of Reduction of NOx Emission by High Temperature Air Combustion Technology
A numerical study on Nox emission from an industrial furnace utilizing high temperature air combustion (HTAC) technology was done. The basic concept of the regenerative burner including heating a diluting of fresh air by flue gas was implemented in a two-dimensional furnace model. Governing equations in conjunction with a turbulence model and an overall chemistry model were solved using an impl...
متن کاملModelling NOx-Formation in Combustion Processes
As the regulations of pollutant emission is getting more and more strict, models of pollutant formation, as a part of system level models for control design, are needed. In this thesis NOx (nitrogen oxides) formation is modeled. A method is developed to mix equilibrium and non-equilibrium reaction equations to model NOx formation in combustion processes. This algorithm reduces high-index DAE sy...
متن کاملCalcination Treated of Mixed Spinel ZnFe2O4 Synthesized by Combustion Method
ZnFe2O4 mixed spinel ferrite nanoparticles obtained through a citrate-nitrate combustion method. Ignited products calcined at different temperatures in 600-900ºC range and effect of calcination treatment temperature investigated. Final Products characterized by X-ray Diffraction (XRD), Fourier-Transform Infrared spectroscopy (FTIR), and Field Emission Scanning Electron Microscopy (FESEM). The a...
متن کاملCalcination Treated of Mixed Spinel ZnFe2O4 Synthesized by Combustion Method
ZnFe2O4 mixed spinel ferrite nanoparticles obtained through a citrate-nitrate combustion method. Ignited products calcined at different temperatures in 600-900ºC range and effect of calcination treatment temperature investigated. Final Products characterized by X-ray Diffraction (XRD), Fourier-Transform Infrared spectroscopy (FTIR), and Field Emission Scanning Electron Microscopy (FESEM). The a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Proceedings of Conference of Kansai Branch
سال: 2020
ISSN: 2424-2756
DOI: 10.1299/jsmekansai.2020.95.p_022