N?Type Single Walled Carbon Nanotube Thin Film Transistors Using Green Tri?Layer Polymer Dielectric

Thin-film Single-walled Carbon Nanotube Transistors Fabricated Using Mechanical Meniscus Aligned Arrays by Vineet Nazareth

Solution-processed single walled carbon nanotube electrodes for organic thin-film transistors

Airbrushed single walled carbon nanotube (SWCNT) thin films with sheet resistivity <1 kX/ sq. and transparency >80% are used as electrodes for pentacene and regioregular poly(3hexylthiophene) (P3HT) thin-film transistors (TFTs). Airbrushed SWCNT electrodes show low contact resistance in a bottom-contact configuration, comparable to (in the case of P3HT) or lower than (in the case of pentacene) ...

Printed thin-film transistors and complementary logic gates that use polymer-coated single-walled carbon nanotube networks

Seung-Hyun Hur Department of Materials Science and Engineering, University of Illinois at Urbana-Champaign, Urbana, Illinois 61801; Beckman Institute and Frederick Seitz Materials Research Laboratory, University of Illinois at Urbana-Champaign, Urbana, Illinois 61801; and Center for Advanced Functional Polymers, Department of Chemical and Biomolecular Engineering, Korea Advanced Institute of Sc...

Logic circuits composed of flexible carbon nanotube thin-film transistor and ultra-thin polymer gate dielectric

Printing electronics has become increasingly prominent in the field of electronic engineering because this method is highly efficient at producing flexible, low-cost and large-scale thin-film transistors. However, TFTs are typically constructed with rigid insulating layers consisting of oxides and nitrides that are brittle and require high processing temperatures, which can cause a number of pr...

Printable thin film supercapacitors using single-walled carbon nanotubes.

Thin film supercapacitors were fabricated using printable materials to make flexible devices on plastic. The active electrodes were made from sprayed networks of single-walled carbon nanotubes (SWCNTs) serving as both electrodes and charge collectors. Using a printable aqueous gel electrolyte as well as an organic liquid electrolyte, the performances of the devices show very high energy and pow...