Numerical Analysis for Dynamic Behavior and Deformation of Composite Breakwater and Seabed under Wave Action by VOF-Elasto-plastic FEM Model
نویسندگان
چکیده
منابع مشابه
Numerical Analysis of Severe Plastic Deformation by High Pressure Torsion
High-pressure torsion (HPT) is a metal processing method in which the sample is subjected to a very high plastic shear deformation. This process can produce exceptional levels of grain refinement, and provides a corresponding improvement in mechanical properties. To investigate the stress and strain distribution due to HPT process finite element simulation were conducted to investigate effectiv...
متن کاملNumerical Simulation of Wave Overtopping Over Composite Berm Breakwater
Breakwaters have changed a lot during their design history. Overtopping is an important parameter that its evaluation and reduction has always been noticed. In this study, the wave overtopping of composite berm breakwater as a new conceptual structure has been investigated numerical modeling was performed using FLOW-3D software. Then, based on a laboratory model conducted by Losada et al, cali...
متن کاملNumerical modelling of elastic-plastic deformation at crack tips in composite material under stress wave loading
The paper deals with the elastic-plastic wave propagations in an anisotropic material subjected to impact loading with emphasis on an ideal fibre-reinforced cubic material under two-dimensional plane strain condition. The system of partial differential equations is hyperbolic. Therefore a characteristic-based difference method is proposed to calculate the formation of the plastic zone at the cr...
متن کاملdiagnostic and developmental potentials of dynamic assessment for writing skill
این پایان نامه بدنبال بررسی کاربرد ارزیابی مستمر در یک محیط یادگیری زبان دوم از طریق طرح چهار سوال تحقیق زیر بود: (1) درک توانایی های فراگیران زمانیکه که از طریق برآورد عملکرد مستقل آنها امکان پذیر نباشد اما در طول جلسات ارزیابی مستمر مشخص شوند; (2) امکان تقویت توانایی های فراگیران از طریق ارزیابی مستمر; (3) سودمندی ارزیابی مستمر در هدایت آموزش فردی به سمتی که به منطقه ی تقریبی رشد افراد حساس ا...
15 صفحه اولA 3D elasto-plastic FEM program developed for reservoir Geomechanics simulations: Introduction and case studies
The development of yielded or failure zone due to an engineering construction is a subject of study in different disciplines. In Petroleum engineering, depletion from and injection of gas into a porous rock can cause development of a yield zone around the reservoir. Studying this phenomenon requires elasto-plastic analysis of geomaterial, in this case the porous rocks. In this study, which is a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Japan Society of Civil Engineers, Ser. B2 (Coastal Engineering)
سال: 2010
ISSN: 1884-2399,1883-8944
DOI: 10.2208/kaigan.66.921