NUMERICAL ANALYSIS OF CASTELLATED BEAM
نویسندگان
چکیده
منابع مشابه
OPTIMIZATION OF OPENING SIZE FOR CASTELLATED BEAM WITH SINUSOIDAL OPENINGS
Castellated beams are generally provided with hexagonal and circular openings in the web portion. However, in view of structural applications, appropriate size and shape of openings in web are always a major issue of concern. Research work carried out in optimizing sizes of castellated beam with hexagonal openings have reported that castellated beams fail mainly by local failure modes and stres...
متن کاملNumerical Analysis of Cyclic Behavior of Beam-To-Column Bolted Connections in Steel Frames
This article considers the seismic behavior of beam-to-column joints in steel frames for different bolt arrangements by using of finite element modeling. As the most important beam-to-column joint type, the beam-to-column joints with end-plate is chosen for the analysis. Four different specimens have been analyzed. These models had some differences such as bolt arrangement and the presence or a...
متن کاملNumerical Analysis of End Plate Bolted Connection with Corrugated Beam
Steel extended end plate bolted connections are recommended to be widely utilized in special moment-resisting frame subjected to monotonic loading. Improper design of steel beam to column connection can lead to the collapse and fatality of structures. Therefore comprehensive research studies of beam to column connection design should be carried out. Also the performance and effect of corrugated...
متن کاملNumerical simulation of laser beam welding of Ti6Al4V sheet
This paper was aimed to report the 3D finite element analysis simulation of laser welding process of Ti6Al4V 1.7 mm sheets in butt joint in order to predict the temperature distribution, hardness, and weld geometry. The butt-joint welds were made using CO2 laser with the maximum power of 2.2 kW in the continuous wave mode. A part of the experimental work was carried out to verify the weld geome...
متن کاملdistrbution of stress in sections of castellated beam in elastic and plastic condition
many researchers have been efforted to identify the shape of distribution of stress and strength of castellated beam and base on that, offer a method for design that members. through this methods, comparing virendil method by simplicity and reasonable results, have been used widly. regardless from shortcoming of this method, there is two idea for distribution of stresses via primary bending in ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the VŠB – Technical University of Ostrava, Civil Engineering Series
سال: 2013
ISSN: 1804-4824,1213-1962
DOI: 10.2478/tvsb-2013-0015