Numerical Analysis of Fiber Orientation Distribution under Consideration of Fiber-Die Surface Interaction in Simple Shear Flow.
نویسندگان
چکیده
منابع مشابه
Fiber Orientation Kinetics of a Concentrated Short Glass Fiber Suspension in Startup of Simple Shear Flow
The common approach for simulating the evolution of fiber orientation during flow in concentrated suspensions is to use an empirically modified form of Jeffery’s equation referred to as the Folgar-Tucker (F-T) model. Direct measurements of fiber orientation were performed in the startup of shear flow for a 30 wt % short glass fiber-filled polybutylene terephthalate (PBT-30); a matrix that behav...
متن کاملFiber Orientation Kinetics of a Concentrated Short Glass Fiber Suspension in Start up of Shear Flow
The common approach for simulating the evolution of fiber orientation during flow in concentrated suspensions is to use an empirically modified form of Jeffery’s equation referred to as the Folgar-Tucker model. Direct measurements of fiber orientation were performed in startup of shear flow for a 30 wt % short glass fiber-filled polybutylene terephthalate (PBT-30); a matrix that behaves similar...
متن کاملShear Strength of Fiber-Reinforced Clayey Sands
Consolidated-drained triaxial compression tests were conducted to compare the stress-strain and volume change response of sands and clayey sands reinforced with discrete randomly distributed poly-propylene fibers. The influence of various test parameters such as fiber content (0.0%, 0.5% and 1.0% by weight), clay content (0%, 10% and 20% by weight), relative density (50% and 90%) and confining ...
متن کاملEffect of Fiber Surface Treatment on Wear Characteristics of Carbon Fiber Reinforced Polyamide 6 Composites
Ozone modification method and air-oxidation were used for the surface treatment of polyacrylonitrile(PAN)-based carbon fiber. The surface characteristics of carbon fibers were characterized by X-ray photoelectron spectroscopy (XPS). The interfacial properties of carbon fiber reinforced polyamide 6 (CF/PA6) composites were investigated by means of the single fiber pull-out tests. As a result...
متن کاملEffect of fiber surface treatments on the fiber-matrix interaction in banana fiber reinforced polyester composites
Cellulosic bers have been used as cost-cutting llers in plastic industry. Among the various factors, the nal performance of the composite materials depends to a large extent on the adhesion between the polymer matrix and the reinforcement and therefore on the quality of the interface. To achieve optimum performance of the end product, suf cient interaction between the matrix resin and th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C
سال: 1998
ISSN: 0387-5024,1884-8354
DOI: 10.1299/kikaic.64.1848