Numerical and experimental investigations for hot metal gas forming of stainless steel X2CrTiNb18

Investigation of hot metal gas forming process of square parts

Aluminum alloys are considered a lot in the automotive and aerospace industry because of their high strength to weight ratio. In this manuscript, the gas forming process of aluminum AA6063 tubes at high temperatures up to 500°C is investigated, through experimental and numerical tests. Therefore, an experimental setup is prepared and so, tube specimens are formed in a die with square cross sect...

Experimental Investigations on Stretchability of an Austentic Stainless Steel 316L

The purpose of this investigation is to examine the viability of using the sheet metal for forming applications. Forming limit diagram (FLD) composed of negative and positive minor strain with respect to major strain which occurs at directional zero strain with the critical thickness of sheet metal. The negative minor strain region of FLD is predicted by localized necking. However there is no d...

Investigation of fluid flow and heat transfer in tube hot metal gas forming process

In this study, hot metal gas forming process of AA6063aluminumtubeis studied with a focus on heat transfer of both fluid and solid phases numerically. An experimental study is simultaneously conducted to validate the numerical method. Some of the most important outputs of the present study, are velocity distribution of fluid inside the tube as well as the fluid in the gap between tube and matri...

Numerical study on the effect of input variations on bulge height in hot tube metal gas forming process

.Hot metal gas forming of tubes can be used in various industries such as automotive and aerospace industries. In this process tube is formed at elevated temperatures, by using gas instead of fluid pressure. Lower required pressure and low power are its advantages in comparison to hydroforming process. In this paper, a hot metal gas bulging process of an aluminum alloy tube has been investigate...

Cold Forming Stainless Steel Bar and Wire