Numerical and Experimental Study for Improvement of Formability in Flexible Forming Process
نویسندگان
چکیده
منابع مشابه
numerical and experimental evaluation of forming limit in hydrodynamic forming process for spherical end samples
0
متن کاملNumerical and Experimental Analysis and Optimization of Process Parameters of AA1050 Incremental Sheet Forming
The incremental sheet metal forming (ISMF) process is a new and flexible method that is well suited for small batch production or prototyping. This paper studies the use of the finite element method in the incremental forming process of AA1050 sheets to investigate the influence of tool diameter, vertical step size, and friction coefficient on forming force, spring-back, and thickness distribut...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Numerical and Experimental Study of Effect of Scan Velocity in Laser Forming by Temperature Gradient Mechanism
In this paper the process of laser forming has been investigated using an analytical and an experimental method for three levels scans velocity. A coupled analysis has been performed in ANSYS®. Also in order to prove the predictive methods, experiments on thin sheet metals have been done when a laser of a fair power was used. Before done, experiments were designed with full factorial chosen as ...
متن کاملExperimental and numerical study of heat flux distribution in laser forming of bi-layer sheets
Laser forming is a modern process which is mainly used for forming metals. Different Lasers are used in this regard that includes Nd: YAG and CO2. In this study, forming bi-layer sheets of Aluminum/Ceramic by Laser was investigated. Furthermore, effect of Uniform and Gaussian heat flux distribution in different power, velocity, and beam diameters on bending angle was studied. FEM simulation ind...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of Materials Processing
سال: 2012
ISSN: 1225-696X
DOI: 10.5228/kstp.2012.21.7.432