Numerical aspects of the XFEM — The XFEM p–Version
نویسندگان
چکیده
منابع مشابه
A numerical approach for modelling thin cracked plates with XFEM
The modelization of bending plates with through the thickness cracks is investigated. We consider the Kirchhoff-Love plate model which is valid for very thin plates. We apply the eXtended Finite Element Method (XFEM) strategy: enrichment of the finite element space with the asymptotic bending and with the discontinuity across the crack. We present two variants and their numerical validations an...
متن کاملNumerical Study of the Effects of Residual Stress on Fretting Fatigue Using XFEM
Residual compressive stress can improve fretting fatigue strength. In this paper, the effects of residual stress on fretting fatigue of Al 2024-T351 alloy specimens are studied using a numerical approach. The extended finite element method combined with the cyclic cohesive zone model is adopted to model fretting fatigue crack growth behavior. It is shown that residual stress changes the frettin...
متن کاملIntroduction to eXtended Finite Element (XFEM) Method
Abstract: In the present study the software CrackComput , based on the Xfem and Xcrack libraries has been used for three problemsto experiment on the convergence properties of the method applied to elasto-statics crack problems, comparison of stress intensity factors to simplified analytical results and study of the Brazilian fracture test. All the problems are treated in two dimensions under p...
متن کاملNumerical Analysis of the Effect of External Circumferential Elliptical Cracks in Transition Thickness Zone of Pressurized Pipes Using XFEM
The present work investigates the effect of the elliptical three-dimensional (3D) cracks on a pipe with thickness transition, considering internal pressure. Level sets were defined using the extended finite element method (XFEM), the stress intensity factors (SIFs) of 3D cracks were investigated and compared between straight pipes and pipes with thickness transition. The results show that the X...
متن کاملAnalysis of an XFEM Discretization for Stokes Interface Problems
We consider a stationary Stokes interface problem. In the discretization the interface is not aligned with the triangulation. For the discretization we use the P1 extended finite element space (P1-XFEM) for the pressure and the standard conforming P2 finite element space for the velocity. Since this pair is not necessarily LBB stable, a consistent stabilization term, known from the literature, ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: PAMM
سال: 2006
ISSN: 1617-7061,1617-7061
DOI: 10.1002/pamm.200610075