Numerical Investigation of Film Cooling over a Flat Plate with Varying Injection Angle
نویسندگان
چکیده
منابع مشابه
Shape optimization of impingement and film cooling holes on a flat plate using a feedforward ANN and GA
Numerical simulations of a three-dimensional model of impingement and film cooling on a flat plate are presented and validated with the available experimental data. Four different turbulence models were utilized for simulation, in which SST had the highest precision, resulting in less than 4% maximum error in temperature estimation. A simplified geometry with periodic boundary conditions is de...
متن کاملAn Experimental Study of Mist / Air Film Cooling On a Flat Plate With Application to Gas
Film cooling is a cooling technique widely used in highperformance gas turbines to protect the turbine airfoils from being damaged by hot flue gases. Motivated by the need to further improve film cooling in terms of both cooling effectiveness and coolant coverage area, the mist/air film cooling scheme is investigated through experiments in this study. A small amount of tiny water droplets (7% w...
متن کاملan investigation of the types of text reduction in subtitling: a case study of the persian film gilaneh with english subtitles
چکیده ندارد.
15 صفحه اولFluid Flow and Heat Transfer of Nanofluids over a Flat Plate with Conjugate Heat Transfer
The falling and settling of solid particles in gases and liquids is a natural phenomenon happens in many industrial processes. This phenomenon has altered pure forced convection to a combination of heat conduction and heat convection in a flow over a plate. In this paper, the coupling of conduction (inside the plate) and forced convection of a non-homogeneous nanofluid flow (over a flat plate) ...
متن کاملNear Field of Film Cooling Jet Issued into a Flat Plate Boundary Layer: Les Study
We report results from a computational study of film cooling from cylindrical holes inclined at 35 degrees with respect to a flat surface using Large Eddy Simulations (LES). The hole length is L/d = 3.5, distance between the holes is P/d = 3, boundary layer above the flat surface is turbulent with Reθ = 938, density ratio = 0.95, velocity ratio = 0.5. All pertinent components of geometry, namel...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Conference on Aerospace Sciences and Aviation Technology
سال: 2017
ISSN: 2636-364X
DOI: 10.21608/asat.2017.22387