Numerical modeling of combined reinforcement concrete beam

نویسندگان

چکیده

Because polymer-composite reinforcements are a new material in construction, the possibilities of their use load-bearing structures, including concrete beams, somewhat limited by existing regulations. The research work implemented this article is to study strength and stiffness cases where steel reinforcement tensile zone composite polymer compressive concrete. Concrete beams with combined object study, stress-deformation state its subject. behavior under static load was studied. Considering nonlinear properties materials finite element method, stress-strain states were investigated. A 3D beam model created using ANSYS Workbench 2022R1, 3 series samples chosen compared hand calculations. metal carried out numerical analysis. Also, study’s results show that role installed better than performance without zone. Although failure starts rebar zone, installation compression shows an increase bearing capacity beam.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Concrete Reinforcement Modeling for Efficient Information Sharing

Concrete reinforcing requires coordination among many roles: structural engineer, estimator, detailer, fabricator, installer and others. The methods used to define and represent concrete reinforcement elements and assemblies in building information models is crucial in determining the efficiency of sharing data among BIM platforms and the effectiveness of using the carried data in production pl...

متن کامل

Numerical simulation of the shear behaviour of reinforced concrete rectangular beam specimens with or without FRP-strip shear reinforcement

The successful validation of a numerical model is presented that can realistically approximate the shear behaviour of reinforced concrete (R/C) rectangular beams strengthened against shear with externally applied open hoop fibre reinforcing polymer (FRP) strips. For this purpose, the measured load-deformation response of ten (10) full-scale R/C beam specimens is utilised. These specimens were l...

متن کامل

Modeling of Reinforcement in Concrete Beams Using Machine Learning Tools

The paper discusses the results obtained to predict reinforcement in singly reinforced beam using Neural Net (NN), Support Vector Machines (SVM’s) and Tree Based Models. Major advantage of SVM’s over NN is of minimizing a bound on the generalization error of model rather than minimizing a bound on mean square error over the data set as done in NN. Tree Based approach divides the problem into a ...

متن کامل

Equilibrium condition nonlinear modeling of a cracked concrete beam using a 2D Galerkin finite volume solver

A constitutive model based on two–dimensional unstructured Galerkin finite volume method (GFVM) is introduced and applied for analyzing nonlinear behavior of cracked concrete structures in equilibrium condition. The developed iterative solver treats concrete as an orthotropic nonlinear material and considers the softening and hardening behavior of concrete under compression and tension by using...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: E3S web of conferences

سال: 2023

ISSN: ['2555-0403', '2267-1242']

DOI: https://doi.org/10.1051/e3sconf/202340103007