Numerical Modeling of GaAs Solar Cell Performances
نویسندگان
چکیده
منابع مشابه
Modeling of Tunnel Junction (GaAs) in the Cascade Solar Cell
In this paper describes a simple model for tunnel junction (GaAs) between the top cell (GaAs) and bottom cell (Ge) of cascade solar cells. We theoretically studied the electrical characteristics (IV) of GaAs tunnel diode with the accounting program MATLAB for doping concentration of the junction after Using this model between two cascaded solar cell (GaAs / Ge) and we calculate the electrical c...
متن کاملModeling of novel lateral AlGaAs/GaAs quantum well solar cell
In this paper, a novel lateral quantum well (QW) solar cell has been introduced, and the structural parameters effects of these Nano-structures on the device’s performance have been investigated. For modeling, the continuity equation has been solved in the quasi neutral regions. However, to analyze the QWs’ effects, first Schrodinger – Poisson’s equations have been solved self-consistently. To ...
متن کاملDesign of ARC less InGaP/GaAs DJ solar cell with high efficiency
In this work, we used the Atlas Tcad Silvaco software to investigate the effect of adding an additional BSF layer on the performance of InGap / GaAs dual junction solar cells with a hetero tunnel Al0.7Ga0.3As-In0.49Ga0.51P junction. These analyzes indicate that, the addition of a BSF layer to the bottom cell the increase in the thickness of the BSF top cell would reduce the recombination and in...
متن کاملInAs/GaAs Quantum Dot Solar Cell
In this work Silvaco TCAD have been used to model quantum dot solar cell. It was found that the addition of InAs QD(quantum dot) in the intrinsic layer of hetero-structure InGaP/GaAs p-i-n solar cell extends the absorption range of the solar cell, thereby giving rise to efficiency enhancement of the QD solar cell by 3.8851 % it was also observed that the fill factor increases from 83.2724% to 8...
متن کاملNumerical Modeling of Experimentally Fabricated InAs/GaAs Quantum Rings
Single subband model for InAs/GaAs quantum rings (QR), with the electron effective mass depending on the confinement energy by the Kane formula is applied for numerical simulation of the capacitance-voltage (CV) spectroscopy experiments. Geometrical parameters chosen for the model are based on the fabrication process for InAs/GaAs QD/QR. The 3D confined energy problem is solved numerically by t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Electronics and Electrical Engineering
سال: 2013
ISSN: 2029-5731,1392-1215
DOI: 10.5755/j01.eee.19.8.5392