NUMERICAL MODELLING OF TOOTHED GEAR DYNAMICS
نویسندگان
چکیده
منابع مشابه
Numerical Modelling of the Segmental Lining of Underground Structures
There are several methods for analysing the behaviour of underground structures under different loading conditions. Most of these methods have many simplifications; therefore, in some cases, the results are too conservative and a very high safety factor, usually of more than 2 is needed. On the other hand, for stability analysis and the designing of support systems, these methods consider segme...
متن کاملNumerical and Experimental Investigation of Cold orBital Forging of a 16MnCr5 Alloy Spur Bevel Gear
The purpose of this research is to analyze the forging of bevel gears based on conventional forging method with material number 1.7131 with finite element method by means of SUPER FORGE software and to compare it with experimental cold orbital forging results.After doing simulation of conventional forging and obtaining press tonnage due to orbital forging method with DEFORM software, orbital fo...
متن کاملNonlinear Dynamics for Gear Fault Level
Since there are backlash friction and time-varying stiffness, the characteristics of gear pair has strong nonlinearity. When a gear has faults such as pitting, spalling and tooth breakage, there are often some nonlinear characteristics as super-harmonics or sub-harmonics along with vibration signal. These characteristics will cause some difficulty for fault diagnostics, so it is necessary to st...
متن کاملMagnetic Aggregation I: Aggregation Dynamics and Numerical Modelling
Focussing on preplanetary grains growth, we discuss the properties of dust aggregation driven by magnetic dipole forces. While there is no direct evidence for the existence of magnetic grains present in the solar nebula, there are reasons to assume they may have been present. We derive analytical expressions for the cross-section of two interacting dipoles. The effective cross section depends u...
متن کاملNumerical modelling of induced rip currents by discontinuous submerged breakwaters
Submerged breakwaters are one of the shore protective structures. Any discontinuity in these breakwaters causes changes on current parameters including speed and water surface profile. In this paper, discontinuous submerged breakwaters were modelled to investigate the changes in the wave and flow pattern.To investigate the phenomenon, three models including a shore with constant slope, a shore ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Scientific Journal of Silesian University of Technology. Series Transport
سال: 2017
ISSN: 0209-3324,2450-1549
DOI: 10.20858/sjsutst.2017.97.10