Numerical simulation and analysis of multi-scale cavitating flows

Towards Numerical Simulation of Cavitating Flows in Complex Geometries

This paper discusses our efforts to simulate large systems of bubbles in complex geometries, with specific application to modeling cavitation instabilities. An important unstable regime is the transition from sheet-to-cloud cavitation (SCC). Experiments performed by Callenaere et al. (2001) highlight the unsteady flow structures of SCC, which is characterized by unstable regions of vapor bubble...

Numerical Investigation for Steady and Unsteady Cavitating Flows

Numerical Simulation of Cavitating Flows in Diesel Injectors by a Homogeneous Equilibrium Modeling Approach

Due to excessive stress in the orifice, cavitation occurs in high-pressure Diesel injectors. As experiments are very hard to manage for injection conditions (small-scaled, high-speed flow), a numerical model seems to be the right tool to get a better understanding of the flow features inside and at the exit of the injector nozzle. The purpose of this paper is to present a simulation code based ...

A Numerical Investigation of Unsteady Bubbly Cavitating Nozzle Flows

The effects of unsteady bubble dynamics on cavitating flow through a converging-diverging nozzle are investigated numerically. A continuum model that couples the Rayleigh–Plesset equation with the continuity and momentum equations is used to formulate unsteady, quasi-one-dimensional partial differential equations. Flow regimes studied include those where steady-state solutions exist, and those ...

simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water

abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...