Numerical simulation and experimental research of cavitation nozzle based on equation curve
نویسندگان
چکیده
منابع مشابه
Numerical Simulation of Cavitation in Mixed Flow Pump
The purpose of this study is to investigate the performance and three-dimensional behavior of the flow in a mixed flow pump and the way cavitation phenomenon is affected by different parameters such as fluid temperature, pump speed and flow rate. Computational fluid dynamic software FLUENT 6.3 was utilized to simulate the whole flow field of the pump. RNG k-ε model combined with standard wall f...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Influence of nozzle geometry and injection conditions on the cavitation flow inside a diesel injector
Cavitation and turbulence in a diesel injector nozzle has a great effect on the development and primary breakup of spray. However, the mechanism of the cavitation flow inside the nozzle and its influence on spray characteristics have not been clearly known yet because of the internal nozzle flow complexities. In this paper, a comprehensive numerical simulation is carried out to study the intern...
متن کاملNumerical Simulation of Cavitation Inception on Radial Flow Pump
Pump cavitation is the formation and subsequent collapse or implosion of vapor bubbles in a pump. It occurs when the absolute pressure on the liquid falls below the liquid’s vapor pressure. This paper describes the validation of cavitation inception on a radial flow pump which develops 21m of head at 26lps of discharge at its best efficiency point (BEP) of discharge while operating at a speed o...
متن کاملNumerical and Experimental Research of Deep Drawing Process
There are mainly two methods of deep drawing analysis; experimental and analytical/numerical. Experimental analysis can be useful in analyzing the process to determine the process parameters that produce a defect free product, and the analytical/numerical modeling can be used to model and analyze the process through all stages of deformation. This approach is less time consuming and more econom...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Water Supply
سال: 2021
ISSN: 1606-9749,1607-0798
DOI: 10.2166/ws.2021.058