NUMERICAL SIMULATION OF A STEPPED CAPILLARY TUBE USED IN RESIDENTIAL HEAT PUMP SYSTEMS

نویسندگان

چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

numerical simulation of a horizontal ground-coupled heat pump

this study represents effect of four variables in performance of a heat-pump in two cities of tehran and rasht. a computer program has been developed, simulating a certain heat pump acting in different environments with different refrigerants in heating season. the analysis is based on a homogeneous model. effect of different refrigerants, depth of the buried heat exchangers and moisture conten...

متن کامل

Performance assessment of heat pump systems in non-residential buildings by means of dedicated simulation models

A possibility of increasing interest for reducing the energy consumption in office and health care buildings consist in better exploiting the potential of the heat pump technology. This can be done by recovering heat at the condenser when the chiller is used to produce cold (simultaneous heating and cooling demands) or by using the chiller in heat pump mode (non-simultaneous heating and cooling...

متن کامل

Numerical Simulation of Cavitation in Mixed Flow Pump

The purpose of this study is to investigate the performance and three-dimensional behavior of the flow in a mixed flow pump and the way cavitation phenomenon is affected by different parameters such as fluid temperature, pump speed and flow rate. Computational fluid dynamic software FLUENT 6.3 was utilized to simulate the whole flow field of the pump. RNG k-ε model combined with standard wall f...

متن کامل

Experimental and Numerical Study on a Dry-expansion Shell-and-Tube Evaporator Used in Wastewater Source Heat Pump (WWSHP)

Aiming at the issue of bio-fouling build-up on heat exchanger’s surface in wastewater source heat pump (WWSHP) systems, a novel dry-expansion shell-and-tube wastewater evaporator (DESTE) with defouling function was developed. Based on reasonable assumptions, a steady-state model of the DESTE was built to carry out the investigation, which was validated by comparing the simulation results with e...

متن کامل

Advanced simulation methods for heat pump systems

Within the use of renewable energies in buildings several dynamic influences and interactions have to be regarded. For example, the performance of heat pump systems depends sensitively on weather or geological effects as well as on building and user behaviour. An energetic optimization requires an intelligent coupling and control of all components of the building services installation, the buil...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of Thermal Engineering

سال: 2015

ISSN: 2148-7847

DOI: 10.18186/jte.68349