Numerical Simulation of Chip Formation in Metal Cutting Process
نویسندگان
چکیده
منابع مشابه
Chip Formation Process using Finite Element Simulation “Influence of Cutting Speed Variation”
The main aim of this paper is to study the material removal phenomenon using the finite element method (FEM) analysis for orthogonal cutting, and the impact of cutting speed variation on the chip formation, stress and plastic deformation. We have explored different constitutive models describing the tool-workpiece interaction. The Johnson-Cook constitutive model with damage initiation and damag...
متن کاملNumerical Simulation of Oxidation Effects in the Laser Cutting Process
A numerical model is developed for the process of oxygenassisted laser cutting of mild steel. Coupled oxygen concentration and energy balance equations are solved by a controlvolume-based computational scheme, while the velocity field is obtained by analytical boundary theory. The enthalpy method is adopted to trace the free boundary of the phase change and thus determine the molten-layer thick...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
شبیه‌سازی المان محدود فرایند برش متعامد و تعیین ضخامت لایه چسبنده به ابزار در ناحیه دوم برش
The built up layer thickness in secondary deformation zone is one of the important parameters in metal cutting process. The built up layer (BUL) is formed in second deformation zone near the tool-chip interface in the back of the chip. This parameter influences the tool life and machined surface quality. This BUL should not be confused with the built up edge (BUE). The deformation of the BUL in...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TELKOMNIKA Indonesian Journal of Electrical Engineering
سال: 2012
ISSN: 2087-278X,2302-4046
DOI: 10.11591/telkomnika.v10i3.608