Numerical Simulation of Force Enhancement by Cellular Material under Blast Load
نویسندگان
چکیده
منابع مشابه
Numerical Investigation of Circular Plates Deformation under Air Blast Wave
In the current research the maximum deflection of circular plates made of AA5010 and AA1100 alloys under blast load was investigated. Shock waves were produced by exploding a spherical charge in different distances from the center of plates. The ABAQUS software uses conwep equation for blast loading analysis. It was found the results of these simulations have about 30% to 40% inaccuracy in comp...
متن کاملSimulation of the Reactive Powder Concrete (RPC) Behavior Reinforcing with Resistant Fiber Subjected to Blast Load
In research or experimental works related to blast loads, the amount of explosion material and distance of explosion point are very important. So, in this paper has been attempted to present a parametric study of the reactive powder concrete subjected to blast load. The effect of the different amount of TNT adopted the literature, distance of explosion point from RPC slab and also the location ...
متن کاملNumerical Investigation of Structural Response of Corrugated Blast Wall Depending on Blast Load Pulse Shapes
Hydrocarbon explosions are one of most hazardous events for workers on offshore platforms. To protect structures against explosion loads, corrugated blast walls are typically installed. However, the profiles of real explosion loads are quite different depending on the congestion and confinement of Topside structures. As the level of congestion and confinement increases, the explosion load incre...
متن کاملInvestigation of different methods in strengthening braced steel frame under blast load
Unpredicted loading caused by blast or impact may lead to severe damage in structures. Such damage may affect the whole structural performance. Connections are the key contributor to the integrity and energy dissipation capacity of the structural steel systems and play the most important role in mitigating such consequences. In the view of the importance of connections, finite element analysis ...
متن کاملEnhancement Mode HEMTs: Evaluation of Two Approaches by Numerical Simulation
Normally-off operation of high electron mobility transistors is desired for many reasons, however proved to be difficult to achieve, despite the rapid development of the depletion mode devices. Amongst the few approaches proposed so far, we focus on two, which promise high performance. The first device features an InGaN cap layer, while the later relies on gate recess technology. We perform DC ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advances in Mechanical Engineering
سال: 2013
ISSN: 1687-8140,1687-8140
DOI: 10.1155/2013/328651