Numerical Simulation of Geostress and Pore Pressure Evolution around Oil or Water Well under Different Injection-Production Ratio
نویسندگان
چکیده
منابع مشابه
simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
consequence analysis of the leakage, ignition and explosion during high pressure sour gas injection process to the oil reservoir
there is no doubt that human being needs to become integrated with industry and industry needs to be progressed, daily. on the other hand, serious events in industrial units specially in oil industries has been shown that such damages and events are industry related ones. the consequence of such events and damages which resulted in chemical and poisoned explosions and loss of life and property ...
Simulation and Experimental Studies of Mineral Scale Formation Effects on Performance of Sirri-C Oil Field under Water Injection
Water injection is an enhanced oil recovery method which is applied for number of reservoirs especially in the offshore fields around the world. Sea-water injection process is usually associated with important concerns affecting the efficiency, safety, and economy of the operation like formation damage, mineral scaling, early breakthrough and corrosion. Incompatibility between injected and ...
متن کاملGas-oil Ratio and Water-oil Ratio
An indicator of bypassing is a premature drop in gas-oil ratio; i.e., earlier than expected collapse of gas saturation. Early gas collapse (water fillup) may indicate that channeling has occurred. In layered reservoirs with no or little vertical crossflow, water injection in an initially depressurized layer will cause GOR to drop rapidly. Often naturally fractured reservoirs exhibit fast gas co...
متن کاملPore-scale Simulation of Water Alternate Gas Injection
We use a three-dimensional mixed-wet random network model representing Berea sandstone to compute displacement paths and relative permeabilities for water alternating gas (WAG) flooding. First we reproduce cycles of water and gas injection observed in previously published experimental studies. We predict the measured oil, water and gas relative permeabilities accurately. We discuss the hysteres...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Mathematical Problems in Engineering
سال: 2013
ISSN: 1024-123X,1563-5147
DOI: 10.1155/2013/604748