NUMERICAL SIMULATION OF LASER WELD POOL GEOMETRY USING ENTHALPY METHOD

Numerical simulation of the dynamic characteristics of weld pool geometry with step-changes of welding parameters

Abstract The gas tungsten arc welding process is an uncertain nonlinear multivariable system. In order to control the welding process, the nonlinear dynamic relationship between the weld pool geometry reflecting the weld quality and the welding parameters must be developed. A three-dimensional numerical model is developed to investigate the dynamic characteristics of the weld pool geometry when...

Weld Pool Control in Nd : YAG Laser

Influence of laser welding process parameters on weld pool geometry and duty cycle

In pulsed Nd:YAG laser welding process, the material melts and solidifies consecutively by a peak high power laser beam. The solidification time in this process is very less as compared to that of conventional welding process. The mode of welding process is governed by the process parameters like laser energy, pulse duration, pulse frequency, power and welding speed. This paper aimed at to exam...

Numerical simulation of laser beam welding of Ti6Al4V sheet

This paper was aimed to report the 3D finite element analysis simulation of laser welding process of Ti6Al4V 1.7 mm sheets in butt joint in order to predict the temperature distribution, hardness, and weld geometry. The butt-joint welds were made using CO2 laser with the maximum power of 2.2 kW in the continuous wave mode. A part of the experimental work was carried out to verify the weld geome...

Prediction of the weld pool geometry of TIG arc welding by using fuzzy logic controller

The present paper describes fuzzy logic simulation of tungsten inert gas welding (TIG) process to predict the weldment macrostructure zones' shape profile characteristics. The prediction of the weld pool geometry together with the shape of the heat affected zone (HAZ) was accomplished taking into account of TIG welding process parameters such as arc traverse speed, welding current and arc lengt...