Numerical simulation of shear band formation in hyperelastic material by energy relaxation
نویسندگان
چکیده
منابع مشابه
suppression of coke formation in thermal cracking by coke inhibitors
the main purpose of this research was to:1.develop a coking model for thermal cracking of naphtha.2.study coke inhibition methods using different coke inhibitors.developing a coking model in naphtha cracking reactors requires a suitable model of the thermal cracking reactor based on a reliable kinetic model.to obtain reliable results all these models shall be solved simultaneously.for this pu...
15 صفحه اولsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Shear Band Formation in Bulk Metallic Glasses
In recent times, there has been a growing interest in the machining of amorphous metallic alloys, which are also called bulk metallic glasses (BMGs). These materials differ from common polycrystalline metallic alloys, because their atoms do not assemble on a crystalline lattice, and as a result, they have unique physical, mechanical, and chemical properties. A number of BMGs have been found to ...
متن کاملLinear analysis of melt band formation by simple shear
Recent experiments by Holtzman et al. [2003] demonstrate that partially molten aggregates of many mantle materials undergoing simple shear (from ∼ 100−500% strain) will spontaneously develop localized melt-rich bands. These bands develop at small strains but persist at low angles to the plane of shear (∼ 15– 20) even at large shear strains. The melt-rich bands also appear to form localized weak...
متن کاملWellbore Stability in Shale Formation Using Analytical and Numerical Simulation
Optimization of drilling fluid parameters such as mud weight, salt concentration, and temperature is essential to alleviate instability problems during drilling through shale sections. The selection of suitable mud parameters can benefit from analyses that consider significant instability processes involved in shale-drilling–fluid interactions. This paper describes the development of analytical...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: PAMM
سال: 2009
ISSN: 1617-7061,1617-7061
DOI: 10.1002/pamm.200910142