Numerical simulation of the mold filling process and its experimental validation
نویسندگان
چکیده
Abstract The present study deals with the simulation of filling process in injection molding using Ansys CFX and its experimental validation. For this purpose, an exemplary mold is investigated numerically as well experimentally at different time steps. numerical investigation, a suitable model elaborated CFX, which enables such comparison. In particular, representation viscosity for polymers not common CFX. Therefore, Carreau-WLF adapted considered polymer Schulamind 66 SK 1000 integrated into contribution focuses on comparison calculated flow front contour respective levels melt from experiments. Furthermore, detailed analysis temperature profiles included order to illustrate effect shear-induced changes interplay between field injected polymer. conclusion, nicely fits results despite some slight deviations early stages.
منابع مشابه
Numerical Modeling of Mold Filling and Curing in Non-Isothermal RTM Process (RESEARCH NOTE)
Resin Transfer Molding (RTM) is a composite manufacturing process. A preformed fiber is placed in a closed mold and a viscous resin is injected into the mold. In this paper, a model is developed to predict the flow pattern, extent of reaction and temperature change during filling and curing in a thin rectangular mold. A numerical simulation is presented to predict the free surface and its inter...
متن کاملMODELING SURFACE TENSION AND WALL ADHESION IN MOLD FILLING PROCESS
Abstract: In this study an algorithm for mold-filling simulation with consideration of surface tension has been developed based on a SOLA VOF scheme. As the governing equations, the Navier-Stokes equations for incompressible and laminar flows were used. We proposed a way of considering surface tension in mold-filling simulation. The proposed scheme for surface tension was based on the conti...
متن کاملMOLD FILLING BEHAVIOR OF DOUBLE GATING SYSTEM IN ALUMINUMLFC PROCESS
The mold-filling behavior in the casting of aluminum alloy (A413) using lost foam casting (LFC) was explored. The effects of gate numbers, type of gating and casting thickness on the filling behavior were evaluated. Although, unlike convectional casting process, the gating system showed little effect onfilling ability, casting thickness created a greater effect on the mold filling. In contrast ...
متن کاملconstruction and validation of the translation teacher competency test and the scale of students’ perceptions of translation teachers
the major purpose of this study was to develop the translation teacher competency test (ttct) and examine its construct and predictive validity. the present study was conducted in two phases: a qualitative phase as well as a quantitative phase. in the first phase of the study, the author attempted to find out the major areas of competency required for an academic translation teacher. the second...
construction and validation of translation metacognitive strategy questionnaire and its application to translation quality
like any other learning activity, translation is a problem solving activity which involves executing parallel cognitive processes. the ability to think about these higher processes, plan, organize, monitor and evaluate the most influential executive cognitive processes is what flavell (1975) called “metacognition” which encompasses raising awareness of mental processes as well as using effectiv...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The International Journal of Advanced Manufacturing Technology
سال: 2022
ISSN: ['1433-3015', '0268-3768']
DOI: https://doi.org/10.1007/s00170-022-08888-9