Oil and gas processing products to obtain polymers modified bitumen

Rheological properties of modified Bitumen: Comparison of waste polymers’ performance

In this investigation, rheological properties of three different polymer-modified bitumen compounds containing recycled polyethylene terephthalate (R-PET), crumb rubber (CR) and poly (styrene-butadiene-styrene) (SBS) are evaluated and compared. The modified samples were tested by a dynamic shear rheometer (DSR) where complex modulus (G*), phase angle (δ) and rutting resistance (G*/Sinδ) of spec...

consequence analysis of the leakage, ignition and explosion during high pressure sour gas injection process to the oil reservoir

there is no doubt that human being needs to become integrated with industry and industry needs to be progressed, daily. on the other hand, serious events in industrial units specially in oil industries has been shown that such damages and events are industry related ones. the consequence of such events and damages which resulted in chemical and poisoned explosions and loss of life and property ...

Desulfurization of Gas Oil by Modified Clinoptilolite

The objective of this research is to find an economically attractive alternative method for hydrodesulfurization of petroleum fractions and to select a suitable adsorbent for this process.Deep desulfurization of transportation fuels (gasoline, diesel, and jet fuels) is being mandated by governments and is also needed for future fuel cell applications. However, it is extremely difficult and ...

Heavy Oil and Tar Sand Bitumen

Coal, Oil Shale, Natural Bitumen, Heavy Oil, and Peat